Disc brake catching

Sorting out your thrunge brackets, fettling your inter-rositers and even stuff about bike parts.
coeur
Posts: 3
Joined: Sat Sep 23, 2017 17:53 pm

Disc brake catching

Postby coeur » Mon Sep 25, 2017 17:09 pm

Hi, i'm looking for some suggestions to solve the following problem please:

I have a new bike with disc brakes. The front brake seems to be touching something once every revolution. However, when I touch the brake lever the catching stops. It is almost as though the brake pads have some slack or play in the caliper and they are touching the rotor. As soon as the slack is taken up by touching, not pulling, the brake lever the noise stops. Can anyone relate to this and explain how to remove the 'slack' on the pads and hopefully resolve the problem?

Incidently, when I get off the bike and spin the wheel the noise is not present - I only get the noise when riding the bike?!!

Thanks

User avatar
The Rookie
Posts: 27839
Joined: Thu Apr 30, 2009 09:29 am

Re: Disc brake catching

Postby The Rookie » Mon Sep 25, 2017 17:32 pm

Yup, entirely normal, pad is still bedding in and it's likely the piston hasn't settled to its proper position yet.

02GF74
Posts: 1217
Joined: Tue Oct 19, 2010 20:12 pm

Re: Disc brake catching

Postby 02GF74 » Mon Sep 25, 2017 17:44 pm

If it is a new bike then take it back to the shop for them to look at.

You don't give enough info. Are the brakes Hydraulic or mechanical?

Depending on the brand, with Hydraulic disc there is about 1/2 to 1mm clearance between pads and discs so they should not touch, on or off the bike.

Are callipers centred? Is there any runout in the disc?
Is the wheel fitted correctly and skewer tightened, this may explain the noise when bike is ridden and not.

coeur
Posts: 3
Joined: Sat Sep 23, 2017 17:53 pm

Re: Disc brake catching

Postby coeur » Mon Sep 25, 2017 17:53 pm

The brakes are Shimano BR-M315, Hydraulic Disc Brakes.

How long can I expect this to continue? 50 miles, 100 miles?

What do you mean by 'run out in disc'? Will check the alignment of caliper and ensure the wheel is correctly fitted.

02GF74
Posts: 1217
Joined: Tue Oct 19, 2010 20:12 pm

Re: Disc brake catching

Postby 02GF74 » Mon Sep 25, 2017 18:08 pm

Runout simply put is side to side wobble if the braking surface, ideally there should not be any.

To see this look at the outermost disc edge running in the gap in the calliper.

coeur
Posts: 3
Joined: Sat Sep 23, 2017 17:53 pm

Re: Disc brake catching

Postby coeur » Mon Sep 25, 2017 19:15 pm

Thanks for explanation, I'll check this but there shouldn't be any as the bike is new.

02GF74
Posts: 1217
Joined: Tue Oct 19, 2010 20:12 pm

Re: Disc brake catching

Postby 02GF74 » Mon Sep 25, 2017 21:08 pm

coeur wrote:Thanks for explanation, I'll check this but there shouldn't be any as the bike is new.


In theory there shouldn't be but in practise it is not too difficult to knock a brake disc due to careless handling.

The wheels should spin soundlessly, except for the freehub ratchet obviously. :lol:

User avatar
cooldad
Posts: 32752
Joined: Sat Apr 17, 2010 22:01 pm

Re: Disc brake catching

Postby cooldad » Mon Sep 25, 2017 21:17 pm

Nonsense, there's often a little 'ching' from brakes, depending on the clearance. It's normal. If the brake is actually binding it's a problem.
I don't do smileys.

There is no secret ingredient - Kung Fu Panda

London Calling on Facebook

Parktools

User avatar
JBA
Posts: 2294
Joined: Thu Dec 08, 2011 20:02 pm

Re: Disc brake catching

Postby JBA » Mon Sep 25, 2017 21:32 pm

As others have said, it’s nothing to be worried about and is highly unlikely to be a bent rotor.
If it is bothering you it may be worth realigning the caliper to try and improve the clearance between pads and rotor. Before doing that though try removing and refitting the wheel just in case it is slightly out of line.
“Life has been unfaithful
And it all promised so so much”

Giant Trance 2 27.5 2016 ¦ Bird Zero Mk1 ¦ Giant Revolt Advanced 2 2019 ¦ Giant Defy 1 2015
Giant Anthem 3 2015 ¦ Specialized Myka Comp FSR 2009

02GF74
Posts: 1217
Joined: Tue Oct 19, 2010 20:12 pm

Re: Disc brake catching

Postby 02GF74 » Tue Sep 26, 2017 06:11 am

cooldad wrote:Nonsense, there's often a little 'ching' from brakes, depending on the clearance. It's normal. If the brake is actually binding it's a problem.

You are obviously not trying hard enough. I have and had bikes with shimano, avid, magura and formula disc brakes, various that are set up so as not to make a sound.

User avatar
The Rookie
Posts: 27839
Joined: Thu Apr 30, 2009 09:29 am

Re: Disc brake catching

Postby The Rookie » Tue Sep 26, 2017 08:33 am

Rubbish, they are not a robust system, many won't make a noise but a little noise is far from unexpected and 99% of the time nothing can even be done about it. Maybe try riding your bikes as well as looking at them?


Return to “MTB Workshop & Tech”

Who is online

Users browsing this forum: No registered users and 1 guest