29er Tyres for Stans NoTubes Arch EX Rims

Discuss the eternal "Which fork/bike/tyres should I buy?" questions.
User avatar
iLukeKendall
Posts: 132
Joined: Thu Dec 27, 2012 17:02 pm

29er Tyres for Stans NoTubes Arch EX Rims

Postby iLukeKendall » Tue Jun 10, 2014 19:37 pm

Okay, so this evening I was about to go for a ride to discover I had a puncture. Turns out some glass had burst the inner tube and gave me a slowie.

I managed to get the tyre half way back on, before spending an hour and a half trying to get this final section seated on the rim, snapping four tyre levers in the process. I've now given up as I'm out of usable levers.

The bead on the Continental X King ProTection tyres is an absolute ***** to seat. It's far too stiff to get this final section on, as the rims seem a too wide for the tyre to stretch over. Once seated they ran perfectly.

So the question is...

1. Does anyone have any tips for mounting these tyres more easily?
2. Can anyone recommend low-profile tyres similar to X Kings that will actually seat on 29er Stans NoTubes Arch EX rims?!

Image
Whyte 29-CS • Canyon Ultimate • #CCWMTB • Strava Profile

User avatar
cooldad
Posts: 32752
Joined: Sat Apr 17, 2010 22:01 pm

Re: 29er Tyres for Stans NoTubes Arch EX Rims

Postby cooldad » Tue Jun 10, 2014 19:57 pm

Yes - put the unseated bit downwards, push the opposite sides as deep as possible into the wells and use some of your weight to force the tyre round, like you are trying to squeeze the innards out of a big sausage. - hard in words, but there are videos online.
I don't do smileys.

There is no secret ingredient - Kung Fu Panda

London Calling on Facebook

Parktools

Cqc
Posts: 902
Joined: Tue Nov 19, 2013 18:46 pm

Re: 29er Tyres for Stans NoTubes Arch EX Rims

Postby Cqc » Tue Jun 10, 2014 20:15 pm

Look up schwalbe marathon plus mounting tips into YouTube, good video

User avatar
iLukeKendall
Posts: 132
Joined: Thu Dec 27, 2012 17:02 pm

Re: 29er Tyres for Stans NoTubes Arch EX Rims

Postby iLukeKendall » Tue Jun 10, 2014 22:04 pm

Thanks a lot for the advice guys.

I followed Cqc's suggestion and watched that YouTube clip - the guys suggestion to force the bead into the centre of the rim and work around the wheel to make slack worked a treat. So much so I've got it on successfully twice now without any tyre levers as the first tube had been punctured from the forceful use of tyre levers!

Now just left with two sore thumbs and three inner tubes to repair (one from glass, two from tyre-lever damage!).
Whyte 29-CS • Canyon Ultimate • #CCWMTB • Strava Profile

User avatar
stubs
Posts: 5049
Joined: Sat Jan 27, 2007 19:55 pm

Re: 29er Tyres for Stans NoTubes Arch EX Rims

Postby stubs » Wed Jun 11, 2014 09:17 am

A splash of soapy water helps the tyrebead slip over the rim.
Fig rolls: proof that god loves cyclists and that she wants us to do another lap

User avatar
BigStu2
Posts: 667
Joined: Thu Dec 06, 2007 18:57 pm

Re: 29er Tyres for Stans NoTubes Arch EX Rims

Postby BigStu2 » Thu Jun 12, 2014 12:25 pm

I'm running these rims on my Gyro and love 'em, Fitted with Schwalbe racing ralph 2.25's and they blow up to a healthy size, stuck a rocket ron on the front but its a scrawny little thing compared to the ralphs. Have just stuck them on my Unit as well, no probs mounting them, just the last 150mm you have to get a bit He-man with them but they pump up with a track pump.
Everyone says "splash " a little soapy water around the bead, Dont do that, but a liquid soap and use a rag to wipe a thin layer around the bead, you already know how hard you have to work those thumbs to get it seated so why compound the problem with a slippery tire.
.........all
...at........work
fun..................&
..no.............no
.....is......play


Return to “MTB Buying Advice”

Who is online

Users browsing this forum: No registered users and 9 guests