Powerlink question

New to this MTB'ing lark? Come on in...
aba2005
Posts: 467
Joined: Mon Sep 04, 2006 22:23 pm

Powerlink question

Postby aba2005 » Thu Jul 05, 2007 13:04 pm

I added a powerlink to my HG 73 chain which works fine.

I got a used cassette with the used chain which was also a HG 73, however on this chain the powerlink seems loose on the chain (chain seems thinner than). I think this chain is older than the chain i've got although it doesn't look old. So have shimano made changes in their chains that would mean a powerlink would fit better on the newer versions?

User avatar
nicklouse
Lives Here
Posts: 80660
Joined: Thu Mar 20, 2003 12:14 pm

Postby nicklouse » Thu Jul 05, 2007 13:13 pm

what colour power link is it?

for 9 spd it should be gold. 8/7/6 are sliver.
"Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown

aba2005
Posts: 467
Joined: Mon Sep 04, 2006 22:23 pm

Postby aba2005 » Thu Jul 05, 2007 14:38 pm

they are both 9 speed chains with gold powerlinks. Thats why i don't understand the difference in fit.

Woody2
Posts: 31
Joined: Fri Feb 13, 2004 12:51 pm
Contact:

Postby Woody2 » Thu Jul 05, 2007 16:20 pm

It could be that Powerlinks are part of the Sram set-up and not Shimano. They fit both makes - but perhaps Shimano changed their chain dimensions rather than the Powerink having variations. Or it could be that the older chain has worn itself thinner.

buddha
Posts: 1080
Joined: Tue Jun 20, 2006 23:04 pm
Contact:

Postby buddha » Thu Jul 05, 2007 17:06 pm

I find that chains wear faster than powerlinks.
So after a couple of months the powerlink is a bit loose (side-to-side movement).
Then a few weeks later it's time to replace the chain as it's stretched :-(
So maybe that's what's happened to your chain. See http://www.sheldonbrown.com/chains.html (Measuring Chain Wear section) to check if this is the case.

If anything, I've found shimano chains to be slightly wider than sram. As I've struggled to get powerlinks on them.

whyamihere
Posts: 22514
Joined: Sat Apr 05, 2003 16:53 pm

Postby whyamihere » Thu Jul 05, 2007 17:55 pm

There's supposed to be some lateral movement, it's what allows gear changing. As long as it's not excessive, don't worry.

wwjjtt
Posts: 192
Joined: Sun May 14, 2006 22:52 pm

Postby wwjjtt » Thu Jul 05, 2007 19:14 pm

aren't hg73 chains thinner than the hg53? i'm not 100% with chains but that may be something to do with it.

aba2005
Posts: 467
Joined: Mon Sep 04, 2006 22:23 pm

Postby aba2005 » Thu Jul 05, 2007 19:27 pm

problem solved! The chain had a dodgy link pin so that was what was causing the problem. Got the pin posted and it works fine now.

Thanks for your help everyone.


Return to “MTB Beginners”

Who is online

Users browsing this forum: No registered users and 10 guests