Dented Rim
Binder
Posts: 3
I have Mavic XM317 rims on my spec stumpjumper.
After my last ride I discovered a dent on the side of the rims. It caused a puncture, but isn't too big or too deep, possibly the size of a 10p coin.
Is it feasible to just bend this back into shape and continue using? and any advice on how best to do this?
Thanks
Mark
After my last ride I discovered a dent on the side of the rims. It caused a puncture, but isn't too big or too deep, possibly the size of a 10p coin.
Is it feasible to just bend this back into shape and continue using? and any advice on how best to do this?
Thanks
Mark
0
Comments
-
those rim's are awful..
i flattened 2 of them in one jump...
here
http://www.flickr.com/photos/ukfozzybea ... 046929293/
http://www.flickr.com/photos/ukfozzybea ... 046929293/
<center><font size="1"><hr noshade size="1">Check my <font size="2"><b>NEW </b></font id="size2">Tried, Tested and Recommended kit
Click here to see what items i am currently reviewing and testing
My Full sus ride My Single Speed Full Sus Lower Wyre Car Park
<b>WhatMB Forum Members Flickr Group. Please join up</b> My Flickr photo Album
<hr noshade size="1"><b><font color="black">'try before you buy else prepair to cry!'</b> </font id="black"></font id="size1"></center>0 -
Ok Fozzy, you want to explain the picture of the ti seatpost between two particularly fine looking boobs? [:D]
Back on topic, not sure about straightening dented rims. I did this to my rim at the weekend: http://farm2.static.flickr.com/1271/540 ... 7454d1.jpg I've decided to cut my losses and just get the wheel re-built with a stronger rim.
<font size="1"> <font color="red">Kinesis Maxlight XC Pro II</font id="red"> <font color="blue">Merlin Malt 1 Ltd Edition</font id="blue">
<font color="green">New Cove Hustler!</font id="green"> <font color="purple">Norfolk/Suffolk biking</font id="purple"> </font id="size1">0 -
Depends how it is dented. If its a flat spot, then they are generally buggered, as you will never tension the wheel properly. If its the side of the rim floded over, you can persuade them back with an adjustable spanner.
No idea why this is an XM rim, its light.
<center><font size="1"><font color="red">GT Zaskar LE</font id="red">
<font color="red">GT Ruckus</font id="red">
<font color="red">Me!</font id="red">
<font color="purple">MYSPACE</font id="purple"><hr noshade size="1"><font color="red">Park Tools - help and instructions for all general bike fixes</font id="red">
<font color="red">Sheldon Brown - info about anything and everything</font id="red"></font id="size1"></center>0 -
Thanks
Dave - I pretty much did the same thing somehow
any suggestions on better rims then?0 -
Have a look at Mavic 719 - not too heavy, but sturdy.
<center><font size="1"><font color="red">GT Zaskar LE</font id="red">
<font color="red">GT Ruckus</font id="red">
<font color="red">Me!</font id="red">
<font color="purple">MYSPACE</font id="purple"><hr noshade size="1"><font color="red">Park Tools - help and instructions for all general bike fixes</font id="red">
<font color="red">Sheldon Brown - info about anything and everything</font id="red"></font id="size1"></center>0 -
XM719s have survived my 14 1/2 stone frame doing rather feckless bunnyhops without any problems so far. If they can take my landings they can take most things
http://www.flickr.com/photos/guilliano/0
