20mm
dirt_king88
Posts: 7
Im curious if there is any way of converting my dmr revolver front hub from 20mm to take standard forks. I have marzocchi dj3's in case you need to know!
Always look on the bright side of things. Because you cant see in the dark.
Always look on the bright side of things. Because you cant see in the dark.
Always look on the bright side of things. Because you cant see in the dark.
0
Comments
-
Nope, Dont know why you would want to loose the strength a 20mm hub provides really.
If your wanting regular forks its going to have to be a new hub.
havent fallen off,
im just having a rest
Updated [:D] <font color="red">Glory</font id="red"> <font color="red">Jackal</font id="red">
Safe as Fu<s></s>ck Pushbike Bullsh<s></s>it and <font color="red">Wideopen Mag.</font id="red">0 -
i made an adapter once with a lathe but it would cost to have someone do it;buy new hubkester0
-
Some hubs are interchangeable between the two standards. An example is the Diatech Swinger. I think Hope do one too, but I may be wrong.0
-
<hr noshade size="1">
<center><blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Red Lemon</i>
It\'s because muslims are far more into amateur pyrotechnics than christians.<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote"></center>0 -
Hope front hubs convert.
I think with the dj3's you can buy an different lowers (from diferent forks) to get 20mm
My Scott
My Single Speed
Always remember to pick your Uni according to the local trails or you'll be stuck with nowhere to ride for three years!0
