Bicycle tools

savadeck
savadeck Posts: 18
in Road beginners
Number Tool name use
1 Bottom sleeve Disassembly and assembly of the bottom bracket
2 Crankset puller Disassembly chainring
3 Chain cutter and accessories Assembling and disassembling the chain
4 Flywheel wrench After disassembly and assembly of the flywheel
5 Flywheel sleeve After disassembly and assembly of the flywheel
6 Dead flywheel lock ring hook Disassembly and assembly of dead flywheels and pedals
7 Thin Hub Wrench Disassembling the hub
8 T25 Torx wrench Disassembly and assembly of brake discs
9 One-piece bottom bracket BB wrench Disassembly and assembly of integrated bottom bracket
10 Hex wrench combination Disassembly and assembly of the whole bike screws
11 spoke wrench Adjust the spokes
12 Wire cutter Pipe cutting
13 Foot wrench Disassembly pedal



Comments

  • bondurant
    bondurant Posts: 858
    Fascinating

    Which is your favourite?
  • MattFalle
    MattFalle Posts: 11,644
    wheres the angle grinder and hammer?
    .
    The camera down the willy isn't anything like as bad as it sounds.
  • photonic69
    photonic69 Posts: 2,416
    Disassembly? Disassembly!!!! It's Dismantling you eejit! We're not f'ing Americans here :D


    Sometimes. Maybe. Possibly.

  • pblakeney
    pblakeney Posts: 25,738
    Flywheel? 😂😂😂
    The above may be fact, or fiction, I may be serious, I may be jesting.
    I am not sure. You have no chance.
    Veronese68 wrote:
    PB is the most sensible person on here.
  • webboo
    webboo Posts: 6,087
    I can’t remember the last time I needed to cut a pipe on my bike 12 or used a foot wrench 13.
  • MattFalle
    MattFalle Posts: 11,644
    webboo said:

    I can’t remember the last time I needed to cut a pipe on my bike 12.

    people use them to cut fork steerers
    .
    The camera down the willy isn't anything like as bad as it sounds.
  • mrb123
    mrb123 Posts: 4,613
    Rivet nut tool?
  • webboo
    webboo Posts: 6,087
    MattFalle said:

    webboo said:

    I can’t remember the last time I needed to cut a pipe on my bike 12.

    people use them to cut fork steerers
    I’m fairly sure that your good self has always recommended a junior hacksaw. Mask wearing optional.
  • MattFalle
    MattFalle Posts: 11,644
    webboo said:

    MattFalle said:

    webboo said:

    I can’t remember the last time I needed to cut a pipe on my bike 12.

    people use them to cut fork steerers
    I’m fairly sure that your good self has always recommended a junior hacksaw. Mask wearing optional.
    exactomondo my dear friend - nothing more needed than a junior hacksaw, but there are so silly people out there
    .
    The camera down the willy isn't anything like as bad as it sounds.
  • MattFalle
    MattFalle Posts: 11,644
    mrb123 said:

    Rivet nut tool?

    bottle cage bolt thingies in the frame and anything else you want to bolt into a bike.
    .
    The camera down the willy isn't anything like as bad as it sounds.
  • navrig2
    navrig2 Posts: 1,844
    edited July 2021


    For the bacon grill can just in case the wee handle thing breaks
  • big.bream83SGjmJv
    big.bream83SGjmJv Posts: 53
    edited July 2021
    What about the Mole Grips for when you can't be bothered to find the correct spanner?
    Then wonder why everything is rounded...


    Best tool I ever bought was a Torque Wrench.
  • joshuacwood24
    joshuacwood24 Posts: 4
    It's possible that you already have a toolkit at home with tools such as sockets, wrenches, and screwdrivers. While these tools can be very useful, many bike-specific tools are required to service the bikes. Although these tools aren't necessarily expensive, the right tool can make the difference between a quick, easy maintenance session or an extended interlude that involves cursing, bleeding knuckles, and possible damage to expensive parts. Click

Categories