Super Record Shifter Issue
Hi,
I have an issue with a shifter whereby the finger shifter lever dangles down loose as if a spring has gone missing or failed. Shifting actually works fine on the road but its a bit annoying because the looseness means it vibrates causing sound. Any ideas on this - part required? complexity of job to replace?
Don't want to set about dismantling the thing into a hundred pieces if it's pointless.
Groupset is a Super Record 11 spd 2009-2014 issue.
Thanks!
I have an issue with a shifter whereby the finger shifter lever dangles down loose as if a spring has gone missing or failed. Shifting actually works fine on the road but its a bit annoying because the looseness means it vibrates causing sound. Any ideas on this - part required? complexity of job to replace?
Don't want to set about dismantling the thing into a hundred pieces if it's pointless.
Groupset is a Super Record 11 spd 2009-2014 issue.
Thanks!
0
Comments
-
Do you have the brakes set open?
Push the silver pin in above.The above may be fact, or fiction, I may be serious, I may be jesting.
I am not sure. You have no chance.Veronese68 wrote:PB is the most sensible person on here.0 -
Thanks. No, not open
0 -
Sorry to tell you that going by your photo, it is. I've just checked mine.bobster77 said:Thanks. No, not open
Good news is that it is an easy fix. Just pull the brake lever and push that silver pin inwards. Bingo!
The pin should be flush with the outside of the lever.The above may be fact, or fiction, I may be serious, I may be jesting.
I am not sure. You have no chance.Veronese68 wrote:PB is the most sensible person on here.0
