Sticky freewheel

jamescrampton17
jamescrampton17 Posts: 19
in Workshop
So was oiling the chain before a ride by peddling backwards by hand, only for some reason the cassette, free hub etc wouldn't move backwards. The chain would go slack and sag, and I could feel a lot of tension (almost springy). Then suddenly the system jumps and it spins backwards no problem. Any ideas, what the issue could be? Is it the free hub ?

Sorry this is kinda hard to explain, I have a video but I can't upload here on this!

Comments

  • webboo
    webboo Posts: 6,087
    Your rear mech sticking. Try pushing it forward and see if it springs back.
  • orraloon
    orraloon Posts: 12,674
    Evening. Freehub needs cleaning. Spent several hours this pm trying to do such and finding the particular hub on this bike seems to not allow the freewheel unit to come off for basic cleaning, which is annoying.

    Check out videos on YouTube for how to sort out the issue. GCN, Park Tool etc.
  • jamescrampton17
    jamescrampton17 Posts: 19
    webboo said:

    Your rear mech sticking. Try pushing it forward and see if it springs back.


    yeah seems to spring back fine, I was going to take it into a local bike shop and see what they say
  • MattFalle
    MattFalle Posts: 11,644
    take wheel and cassette off

    undo free wheel -
    its generally a 5mm allen key in each side.

    undo freewheel

    clean with degreaser and gt85, allow to drip dry, use light oil (I use 3:1) to lubricate

    reassemble

    job jobbed

    .
    The camera down the willy isn't anything like as bad as it sounds.
  • david37
    david37 Posts: 1,313
    number one bike maintenance tool? Hot soapy water

Categories