Help with BB Bearing housing width - New Bike

kaveh said:

Hi everyone,
So I received my frame:
Felt AR FRD 2020
https://eu.feltbicycles.com/products/frame-ar-frd-aero-road-frame

Sadly they are not being responsive to my question. Would be great if someone can help me sourcing the right BB

I've found 3 closest match. The frame is BB30 but I'm not sure about the sizing

DUB BB30 Road Wide Bottom Bracket

68mm or 73mm ?
https://www.bike-discount.de/en/buy/sram-dub-bb30-road-wide-bottom-bracket-976687

OR

https://www.bike-discount.de/en/buy/sram-dub-bb30-73-a-bottom-bracket-804530

I can't see any difference between the two link. Maybe Axle diameter?

Which of these 3 bottom bracket would fit the bike?

I'll have Sram Red e tap 22 crank.

Thank you so much

NO to all.

the answer is that it depends on the Axle width and diameter, the crank you listed comes as bb30 or GXP. you need to buy a GXP compatible or a bb30 Bottom bracket.

The GXP variant 24/22mm is available for your bb30 frame from a number of manufacturers and avoids the need to use delrin top caps or similar make it fit compromises. Wheelsmfg is my go to brand, very easy to install and they work very well. Other brands are available. these systems go some way to totally eliminating BB30 creak.
https://wheelsmfg.com/bottom-brackets/bb30-outboard/bb30-to-outboard-bottom-bracket-for-24-22mm-cranks-sram-w-angular-contact-bearings-black.html

if youve got a BB30 frame (where bearings are pressed directly into the frame and stopped by c clips that sit in a groove) and a BB30 crank, then use the BB30 BB. When you install ensure the BB is degreased and cleaned thoroughly, I use bearing retaining compound (check the compatability if yours has a full carbon BBshell.)

delete