Campag Athena ultra torque chainrings

skyblue337
skyblue337 Posts: 135
in Workshop
Anyone know if anyone is making after market replacement chainrings for an 110BCD Athena ultra torque chainset c.2010 (I think it predates the threaded campag rings) and if so where you can get them from (uk based but EU would be ok). I can’t figure out which if any of the TA rings would fit

Comments

  • thegreatdivide
    thegreatdivide Posts: 5,803
    TA Nerius rings will work, but they need the additional TA bolt set (they thread into each other). I'm running TA rings on all my five arm Campag chainsets, threaded ad unthreaded, from Centaur to Super Record.

    These are the bolts:

    https://www.jejamescycles.com/product/41290/ta-ta-ultra-torque-chainring-bolts/option/

  • shortfall
    shortfall Posts: 3,288
    I would ring either Spa Cycles in Harrogate or Cycle Clinic in Glemsford, both of whom stock original and compatible Campagnolo chainrings.
  • cycleclinic
    cycleclinic Posts: 6,865
    The original rings definitely exist. I supplied some recently.

    Fc-at050 and fc-at034.

    Im not back though. Just saw a campag parts thread. The ta rings are not worth it. Àhifting is not as slick and it should be slick.

    http://www.thecycleclinic.co.uk -wheel building and other stuff.
  • joe2019
    joe2019 Posts: 1,338
    I use TA chainrings and they shift fine, can't notice any difference.
  • skyblue337
    skyblue337 Posts: 135
    Thanks for the replies. This will be for a bike on a smart trainer so looking to do it as cheaply possible and shifting is not as big a concern.

Categories