Which crank puller tool?
neilakee
Posts: 2
I have the creaky/clicking bottom bracket problem. I’m going to investigate it myself (first time) to see if it needs a clean or replacing. Little bit confused as to the specific tools I need, especially which crank puller? I think I need these products;
Park Tool BBT-22 Bottom Bracket 20-Tooth Splines Tool.
32mm wrench to be used in conjunction with the above.
Crank puller, not sure which of these two and what’s the difference?
Park Tool CCP-44 Crank Puller For Pipe Billet Spindles Tool
Or
Park Tool CCP-2.2 Cotterless Crank Puller Tool
I have a 2007 Claud Butler Levante, sport commuter.
Thanks in advance.
Park Tool BBT-22 Bottom Bracket 20-Tooth Splines Tool.
32mm wrench to be used in conjunction with the above.
Crank puller, not sure which of these two and what’s the difference?
Park Tool CCP-44 Crank Puller For Pipe Billet Spindles Tool
Or
Park Tool CCP-2.2 Cotterless Crank Puller Tool
I have a 2007 Claud Butler Levante, sport commuter.
Thanks in advance.
0
Comments
-
0 -
I had bad creaking over the weekend on the Supersix, yesterday I took of the non drive crank using a large allen key, then was able to slide the other crack out.
Gave it a jolly good clean and grease, fingers crossed it's done the trick, as I know the BB30 is renowned for issues
Have you a photo of the other crank?0 -
You want one of these:
https://www.wiggle.co.uk/park-tool-compact-crank-wrench-and-puller-cwp-7
And one of these:
https://www.wiggle.co.uk/shimano-bottom-bracket-removal-toolSometimes. Maybe. Possibly.
1 -
Oh and the correct one of these:
https://www.wiggle.co.uk/shimano-un55-bottom-bracket/
Measure overall length of the axle to determine size.Sometimes. Maybe. Possibly.
1 -
What Photonic said, ignore the other bit about BB30 as it's completely different.0
