Wheel rust

Tashman
Tashman Posts: 3,398
Hi, any advice on cleaning up this wheel I purchased from eBay?

Comments

  • Take the parts off and soak in white vinegar. It works!
  • Tashman
    Tashman Posts: 3,398

    Take the parts off and soak in white vinegar. It works!

    Cheers
  • imposter2.0
    imposter2.0 Posts: 12,028
    Not even sure I'd worry about that. Just wire-brush it then protect it with a bit of WD, GT or similar
  • Tashman
    Tashman Posts: 3,398

    Not even sure I'd worry about that. Just wire-brush it then protect it with a bit of WD, GT or similar

    As a maintenance imbecile I wanted to make sure that WD/GT weren't going to cause more issues than they'd resolve in this instance.
  • imposter2.0
    imposter2.0 Posts: 12,028
    Keep the WD away from the bearings. If needs be, just spray some of it onto a brush and apply it that way. That would remove the risk of any over-spray onto the seals or bearings..
  • ugo.santalucia
    ugo.santalucia Posts: 28,172
    Wire brush and then apply some grease
    left the forum March 2023
  • Tashman
    Tashman Posts: 3,398
    Thanks all