Cannondale CAAD 12 disc (purple)

rob_g_clarkson
rob_g_clarkson Posts: 65
edited September 2019 in Your road bikes
w0eSWlM.jpg

Frame: Cannondale CAAD 12 disc (58cm)
Forks: Cannondale CAAD 12
Bars: Easton EC70 aero
Stem: K7 Uno 100mm (de-badged with Ti bolts)
Headset: Cannondale
Bar Tape: hmmm... not sure!

Front Brake Lever: SRAM Red Etap
Front Caliper: SRAM Red Etap post mount
Front Rotor: SRAM Centreline centrelock 160mm
Rear Brake Lever: SRAM Red Etap
Rear Caliper: SRAM Red Etap flatmount
Rear Rotor: SRAM Centreline centrelock 140mm

Shifters: SRAM Red Etap
Cables: N/A 8)
Front Mech: SRAM Red Etap
Rear Mech: SRAM Red Etap wifli

Seat: Brooks Cambium C15
Seat Post: Cannondale C2 carbon
Seat Post Clamp: Canndondale

Cranks: SRAM Red (BB30)
Chainring(s): 52/36
Chain: Sram PC1170
Cassette: Shimano Ultegra 11-30
Pedals: LOOK Keo something or other?
Bottom Bracket: Cannondale BB30a

Front Wheel: HUNT x Mason 4 season
Hub: HUNT
Tube: tubeless
Tyre: Hutchinson sector 28

Back Wheel: HUNT x Mason 4 season
Hub: HUNT
Tube: tubeless
Tyre: Hutchinson sector 28

Accessories: that garmin mount pictured has been binned, it was cheap s***e from ebay and it was bent. So stem based garmin mount for now, lezyne strip lights front and rear, a basics tiny saddle bag, topeak race rocket HP mounted on the down tube & 2 unbranded carbon bottles cages.

Weight: 17lbs/7.7kgs (with none of the above accessories mounted, bar the cages)

i've lusted after this colour frame for a good while now and i just haven't seen one come up either new or second hand in my preferred size of 56cm, but i decided this could work, and it does... it was supposed to be a cheap frame swap from my old Caad 10 disc frame, but i bought new bars... and it needed and different rear caliper and somehow i ended up getting an Etap upgrade (well; shifters, derailleurs, calipers)... you know, because simply clicking "buy it now" is far too easy :roll: :oops:

i imported the frame from the US, it's a 2017 NOS jobbie, so i'm the 1st owner, have warranty and got a great deal on it.

anyway, i only finished building it on tuesday afternoon, and i've been on nights since then, i've yet to have anything other than "a quickly round the block shakedown" ride... hope it's dry tomorrow afternoon, i'm getting a bit impatient :)

Comments