Suspension fork psi?

Stephenjames
Stephenjames Posts: 47
edited August 2019 in MTB workshop & tech
Hi all,

I hate to ask a lame question, but can any tell me a ball park average figure to pump my old Fox F90 forks too?

Many thanks.

Comments

  • lemonenema
    lemonenema Posts: 216
    Google knows

    https://www.ridefox.com/fox_tech_center ... g_Settings
  • robertpb
    robertpb Posts: 1,866
    You pump them up untill you have 25-30% sag, it's that simple.
    Now where's that "Get Out of Crash Free Card"
  • billycool
    billycool Posts: 833
    Try 90-95 psi and go from there.
    "Ride, crash, replace"
  • steve_sordy
    steve_sordy Posts: 2,443
    Nobody can know what pressure you need without knowing how much you and the bike weigh, your desired riding style, whether you prefer a hard or soft ride and so forth. Which is why you have been getting answers talking about %sag. I am good mates with Billy Cool, but he doesn't know either. He does know what he's talking about however, so he is just trying to be helpful. Those pressures will need adjusting after you have ridden the bike.

    Watch this from Fox, it will help you get it almost spot on first time. (You will still need to adjust after riding).

    https://www.youtube.com/watch?v=dh2Q7Fu2pfA
  • Stephenjames
    Stephenjames Posts: 47
    Thank you all for your kind replies to my post, gratefully received. Thank you lemonenema for the Fox F90 chart, most useful, will print that out and keep it for future reference. Thank you all for your input, most useful.

    Regards,

Categories