Bolt on Down Tube armour...
Crazyjenkins01
Posts: 409
Have seen a few bikes with a 'guard' bolted onto the down tube (where there are bottle bosses) but can seem to find anything online.
Considering something for my Calibre Bossnut to help protect the brake hoses and a bit of rock protection.
Any ideas?
Considering something for my Calibre Bossnut to help protect the brake hoses and a bit of rock protection.
Any ideas?
Bossnut - http://www.bikeradar.com/forums/viewtopic.php?f=10017&t=13069531
Vengeance - http://www.bikeradar.com/forums/viewtopic.php?f=10017&t=12897374&p=19829658&hilit=installed#p19829658
Some of the gear, less than no idea...
Vengeance - http://www.bikeradar.com/forums/viewtopic.php?f=10017&t=12897374&p=19829658&hilit=installed#p19829658
Some of the gear, less than no idea...
0
Comments
-
An old folding tyre cut to length does a reasonable job....or don't crash into anything!
The quality guards are sized to fit a particular bike.Currently riding a Whyte T130C, X0 drivetrain, Magura Trail brakes converted to mixed wheel size (homebuilt wheels) with 140mm Fox 34 Rhythm and RP23 suspension. 12.2Kg.0 -
The carbon ones don't bolt on. They're made too small and you soften them up in boiling water to fit them. I've got a Rock Guardz one, it's very good.Transition Patrol - viewtopic.php?f=10017&t=130702350
-
What Rookie says. If you want to have a functioning guard that will see some use, you do not want it to break after the first time it became useful and you also do not want to be dishing out a lot of money for it.0 -
Thanks guys,
I've seen the tyre picture and was looking at doing that sometime when I've got a spare duff tyre! Just wondering what else was around as an option...Bossnut - http://www.bikeradar.com/forums/viewtopic.php?f=10017&t=13069531
Vengeance - http://www.bikeradar.com/forums/viewtopic.php?f=10017&t=12897374&p=19829658&hilit=installed#p19829658
Some of the gear, less than no idea...0 -
The tire guard is not meant for falling off, it protects the downtube from flying debris and from when you fail to bunnyhop a log properly, or misjudge height of a rock.
You do not need to make it out of a used tire, you can just buy the absolutely cheapest one you can find and cut it up. Or you can ask around your locale for some used MTB tires.0 -
Good info guys, cheersBossnut - http://www.bikeradar.com/forums/viewtopic.php?f=10017&t=13069531
Vengeance - http://www.bikeradar.com/forums/viewtopic.php?f=10017&t=12897374&p=19829658&hilit=installed#p19829658
Some of the gear, less than no idea...0
