Grinding noise coming from rear end

core00
core00 Posts: 169
edited May 2016 in MTB beginners
I was cleaning my bizango just a moment ago and when I was pedalling I heard a grinding sound at the rear end, put my ear where the noise and it seems that the rear disk break is grinding on the pad. Is that normal or the rear hydraulic break is too tight?

Comments

  • cooldad
    cooldad Posts: 32,599
    It's normal - they adjust themselves.
    I don't do smileys.

    There is no secret ingredient - Kung Fu Panda

    London Calling on Facebook

    Parktools
  • core00
    core00 Posts: 169
    Oh okay cool, what cleaning stuff does everyone use like for the chain and etc? also oil to put on the chain and sus after cleaning.
  • The Rookie
    The Rookie Posts: 27,812
    No oil on the suspension, they are either cartridge bearings and you just clean the muck away from the joints. If they are bushes you open them periodically and use grease.

    As for the chain, you use a good chain lube, I like squirt water based wax as it doesn't make everything all messy with gunk.
    Currently riding a Whyte T130C, X0 drivetrain, Magura Trail brakes converted to mixed wheel size (homebuilt wheels) with 140mm Fox 34 Rhythm and RP23 suspension. 12.2Kg.

Categories