Marin East Peak (year 2000) rear disc mount adapter

Presky
Presky Posts: 6
edited May 2016 in MTB workshop & tech
Can anyone help? I need a rear disc caliper mount adapter for a Marin East Peak, 2000 model. It's the part shown in the photo (link below) and adapts the Marin frame hole spacings to standard IS. I can't get this part from anywhere and have tried Marin directly as well.

Does anyone either know where I can get on of these OR have the dimensioned drawings so that I can get one machined?

All help appreciated.

https://www.dropbox.com/s/6471p15wqasd9zs/File%2001-05-2016%2C%2011%2002%2002.jpeg?dl=0

Comments

  • cooldad
    cooldad Posts: 32,599
    Looks like it's been a problem for a while.

    viewtopic.php?t=12870746
    I don't do smileys.

    There is no secret ingredient - Kung Fu Panda

    London Calling on Facebook

    Parktools
  • Presky
    Presky Posts: 6
    I'm not hopeful that I'll get the part but if I could get the drawings I could get one made.
  • jamieheth42yJRDnmex
    jamieheth42yJRDnmex Posts: 2
    i have made a couple rear disc mounts from 3k 5mm carbon to fit my Marin east peak year 2000 ish so i can run disc brake- see pictures



    you can't seem to buy this mount which is why i made my own



    its hand made using Dremel so a little rough around the edges, not cnc machine quality but it fits perfect



    my set up on bike as i made this mount is as follows



    shimano xt m785 disc calliper with shimano xt 180mm rear disc rotor and 180mm shimano is to post mount



    if you run a smaller rotor like 160mm then obviously you will use 160mm is to post mount



    if you are running different brand of brakes like HOPE i do not know if this will fit, but i would say only shimano to be safe



    frame bolt holes centre to centre - 36mm





    i am selling one spare one if anybody needs one, its here on ebay



    https://www.ebay.co.uk/itm/325523280472









Categories