Shimano Triple MTB Crank in BB86 Frame???
winnie1966
Posts: 6
Hello
Been googling like mad to get an answer to this without success.
My very stubborn old dad has been given a a Frame with a BB86 bottom bracket and insists he wants a Shimano 44-32-22 MTB
Hollowtech II Chainset in it.
I thought the solution to this was staightforward - put a Shimana Pressfit MTB BB in , namely
http://www.wiggle.co.uk/shimano-pressfi ... t-for-mtb/
But looking a bit deeper at this, it appears that these BB's are for BB89.5(whatever that is ) and BB92.
It seems that if you have a frame with a BB86 Shell you can only put Road chainsets in.
Am i right or am i missing something - i think the latter will be correct btw
Any help would be appreciated
Thanks
Been googling like mad to get an answer to this without success.
My very stubborn old dad has been given a a Frame with a BB86 bottom bracket and insists he wants a Shimano 44-32-22 MTB
Hollowtech II Chainset in it.
I thought the solution to this was staightforward - put a Shimana Pressfit MTB BB in , namely
http://www.wiggle.co.uk/shimano-pressfi ... t-for-mtb/
But looking a bit deeper at this, it appears that these BB's are for BB89.5(whatever that is ) and BB92.
It seems that if you have a frame with a BB86 Shell you can only put Road chainsets in.
Am i right or am i missing something - i think the latter will be correct btw
Any help would be appreciated
Thanks
0
Comments
-
This might help. HTII and square taper I understand, but all the other numbers are just confusing.
http://www.bikeradar.com/gear/article/c ... ets-36660/I don't do smileys.
There is no secret ingredient - Kung Fu Panda
London Calling on Facebook
Parktools0 -
Thanks for the response but cooldad but not what i'm looking for unfortunately.
Anyone else any idea how to run a Shimano 44-32-22 MTB Chainset in a frame with a BB86 bottom bracket bearing in mind that the solution i thought to this was to put a Shimana Pressfit MTB BB in -
http://www.wiggle.co.uk/shimano-pressfi ... t-for-mtb/
appears to be incorrect because this requires a BB89.5 or BB92 width Bottom Bracket Shell0