Specialized Stumpjumper FSR Comp 650b 2016

John Wh
John Wh Posts: 239
edited December 2015 in Your mountain bikes
Hey All,

Finally stepped onto a full suspension! Decided to go for a 2016 Stumpjumper as I've always fancied one and this years model has been revised geometry wise.

Spec:

Rear Shock: Custom FOX FLOAT Evolution CTD, AUTOSAG, Rx Trail Tune, 197x47.6mm

Fork: RockShox Revelation RC3 650b, Solo Air spring, 150mm travel, 3-position compression adjust, rebound adjust, tapered steerer, 42mm offset, 15mm Maxle Lite thru-axle

Stem: Specialized XC, 3D forged alloy, 4-bolt, 6-degree rise

Grips: ESI Racers Edge Foam Grips

Front Mech: SRAM X7, mid direct mount, w/ Taco Blade

Rear Mech: SRAM X9 Type 2, 10-speed, mid cage

Shifters: SRAM X7, 10-speed, w/ Matchmaker clamp

Chainset: Custom SRAM S-1250, 7050 alloy arms, 10-speed double, PF30, 36/22T, 104/64mm BCD spider

Bottom Bracket: SRAM, PF30, OS press-in bearings, sealed cartridge

Pedals: Nukeproof Electron Evo.

Cassette: SRAM PG-1030, 10-speed, 11-36t

Chain: SRAM PC-1031, 10-speed, w/ PowerLink, nickel finish

Front Brake: Shimano Deore, hydraulic disc, resin pads

Rear Brake: Shimano Deore, hydraulic disc, resin pads

Rims: Roval 650b, alloy, 29mm inner width, 24/28h

Front Hub: Specialized, Hi Lo disc, sealed cartridge bearings, 15mm thru-axle, 24h

Rear Hub: Specialized, Hi Lo disc, 4x sealed cartridge bearings, 12mm thru-axle, 28h

Tyres: Butcher 2.3 at front, Purgatory 2.3 at rear.

This is the first time I've used Sram shifters and I'm pleasantly surprised! I've also got a Renthal N/W chainring to go on the front, but ant to get a few rides in before I decided to swap to 1x10.

The upgraded Hoodoo will probably be up for sale soon ;)

I'll get more detailed pics tomorrow :)

IMG_0391.jpg
«1

Comments