Giant TCR3 2012 Bottom Bracket
Superchels1
Posts: 3
I'm looking to replace my bottom bracket on my TCR3 2012 and am a bit confused! The current BB fitted has 'BB AL86 19' etched into it. I've been on Wiggle and it suggests that 'FSA BB86 Bearing Kit' is the one for the job. Having read their reviews, they say that it is compatible, but another post states it is a 24mm diameter instead of the 19mm one I need. Advice very welcome, please!
0
Comments
-
Is this the bike? http://www.giant-bicycles.com/en-gb/bikes/model/tcr.composite.3/9310/49808/#specifications If so spec says it's an FSA MegaExo Pressfit.
Take the L.H. crank arm off and measure the diameter of the axle, probably is 19mm according to this.
http://www.fullspeedahead.com/products/bottom-brackets/bb86-cups-o19-for-alloy-cranksets/#0 -
DJ58 - You are a star!!
That is exactly the one I needed.
Having said that, I've just been out to have a closer look and have managed to get the bearings out of the frame, have cleaned, greased and refitted them and the creaking has stopped. What a bonus! Many thanks0
