wheel build spoke tension help required

hi just building a set of DT Swiss wheels for a friend, and am wondering what tension to finish them with
Here are the items I have used to build them
DTSwissh 240 hubs RR 440 rims and DT Aerolite2.0/0.9/2.3 spokes front
Rear DT swiss 240 hub, RR 440 asymmetric rim and DT Aerolite2.0/0.9/2.3 spokes rear
I have them built up and am ready to tension them and finish truing.
I am using a park tools spoke meter so ideally would like to know the reading to use on that.
Thanks in advance
Here are the items I have used to build them
DTSwissh 240 hubs RR 440 rims and DT Aerolite2.0/0.9/2.3 spokes front
Rear DT swiss 240 hub, RR 440 asymmetric rim and DT Aerolite2.0/0.9/2.3 spokes rear
I have them built up and am ready to tension them and finish truing.
I am using a park tools spoke meter so ideally would like to know the reading to use on that.
Thanks in advance
Specialized S Works SL2 . Campagnolo Record 11spd. rolling on Campag Zonda wheels
http://app.strava.com/athletes/881211
http://app.strava.com/athletes/881211
0
Posts
The rear will need 1200 N and the Park tool is not calibrated for these spokes. Can you not borrow a DT calibrated gauge? Aerolite are a bit different from CX Ray, despite what the numbers say
Thought I read the maximum tension for the aeroloite was 1000 but I may be wrong
http://app.strava.com/athletes/881211
Spokes can take a lot more than rims can
Can I get away with using the park tools meter ? And if so what tensions should I aim for.
Rider is around the 80kg weight
I won't be spending £400 on the DT one that's for sure., not for one build
http://app.strava.com/athletes/881211
Use the supplied chart for a 0.9 x 2.1 bladed spoke, it's the best you can do
http://app.strava.com/athletes/881211
Quintana Roo Cd01
Project High End Hack
Cannondale Synapse SL (gone)
I like Carbon
http://app.strava.com/athletes/881211