RAM bars and Garmins

pinarellokid
pinarellokid Posts: 1,208
edited August 2014 in Road general
i have a set of profile carbon ram bars and want to fit my garmin out front..

im looking for a mount that fits on the steerer and giver a bar under my bars, so i can then mount a garmin mount to it.

hoping then it will poke out from under my bars

something like this
http://www.ebay.co.uk/itm/200913838189? ... 1423.l2649

but that one is about 4 weeks delivery away and the bar section is oval and not oversize.

had a search but not really sure what to search for so cant find one.

can you guys help
Specialized S Works SL2 . Campagnolo Record 11spd. rolling on Campag Zonda wheels

http://app.strava.com/athletes/881211

Comments

  • sungod
    sungod Posts: 16,523
    do the bars have any fittings for a computer mount?

    cinelli ram integrated have two mounting bolts under the 'stem' area, i use the srm mount drilled to match these

    if your bars are similar there's the cinelli checkpoint mount that can be used to fit a standard bar mount...

    http://www.racycles.com/products/detail/27047
    my bike - faster than god's and twice as shiny
  • pinarellokid
    pinarellokid Posts: 1,208
    That would work maybe but shit me $89

    Mine don't have any holes drilled and I don't like the idea of drilling them in case it weakens them, that's why I was looking at the option of a stem spacer type one,
    Specialized S Works SL2 . Campagnolo Record 11spd. rolling on Campag Zonda wheels

    http://app.strava.com/athletes/881211
  • izza
    izza Posts: 1,561
    Have you looked at Raceware? They have a Edge style Garmin mount that fits the Giant Propel aero bars and may therefore fit the profile of the Ram bars
  • pinarellokid
    pinarellokid Posts: 1,208
    yep seen them but i woul have to dril the bars and am worried that would possibly weaken them,, that would be ideal though if it would work,
    Specialized S Works SL2 . Campagnolo Record 11spd. rolling on Campag Zonda wheels

    http://app.strava.com/athletes/881211
  • redvee
    redvee Posts: 11,922
    I use one of these for my light with it mounted at the bottom of the stem clamp, no reason why you couldn't use it at the top of the stem clamp

    http://www.ebay.co.uk/itm/KREX-Light-Co ... 3cd4131f40
    I've added a signature to prove it is still possible.
  • pinarellokid
    pinarellokid Posts: 1,208
    Can't see how that would work on intergrated bars though
    Specialized S Works SL2 . Campagnolo Record 11spd. rolling on Campag Zonda wheels

    http://app.strava.com/athletes/881211
  • redvee
    redvee Posts: 11,922
    pinarellokid wrote:
    Can't see how that would work on intergrated bars though

    Didn't read that bit. Gaffe tape? :lol:
    I've added a signature to prove it is still possible.
  • sungod
    sungod Posts: 16,523
    tbh if the bars have no mounting holes i'd just use the basic mount attached to the 'stem' using the rubber rings

    http://www.chainreactioncycles.com/garm ... -prod44129

    a garmin isn't heavy, but with that steerer mount plus the garmin mount extending out even further, the thing is going to be at the end of a relatively long lever, on rougher road surfaces it'll be vibrating up and down like crazy
    my bike - faster than god's and twice as shiny
  • izza
    izza Posts: 1,561
    pinarellokid wrote:
    yep seen them but i woul have to dril the bars and am worried that would possibly weaken them,, that would be ideal though if it would work,

    THey have two - one fits Propel stem/bar combo which would need drilling but they also have one for Propel bars. Same as K-edge but piece that wraps around the bar is eliptical rather than circular. Might be too far off centre though with yours.

Categories