Nipples

on-yer-bike
on-yer-bike Posts: 2,974
edited February 2014 in Road buying advice
How do you calculate the correct nipple length when building a wheel? For instance why was I recommended 14mm nipples on my Aerohead wheels?
Pegoretti
Colnago
Cervelo
Campagnolo

Comments

  • ugo.santalucia
    ugo.santalucia Posts: 28,242
    You normally use 12 mm, unless the rim requires long ones, for example Mavic CXP 33 and CXP 30 do require 14 or even 16 mm nipples, some Chinese carbon rims do take 14 mm. For other rims, If you don't find the exact spoke length, you can compensate by going one mm shorter and using a 14 mm nipples instead of a 12
    left the forum March 2023
  • cycleclinic
    cycleclinic Posts: 6,865
    Not with sapim nipples you can't the thread length in the nipple is the same for the 12mm ad 14mm nipples.
    http://www.thecycleclinic.co.uk -wheel building and other stuff.
  • nicklouse
    nicklouse Posts: 50,675
    thecycleclinic wrote:
    Not with sapim nipples you can't the thread length in the nipple is the same for the 12mm ad 14mm nipples.
    and a few other makes.

    have a pair of Disc wheels (MTB) i built with half and half 12 and 14mm nipples as i was short of the correct length spokes.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown

Categories