Chain guide / chain tensioner on a 3 X 10

joerodman
joerodman Posts: 20
edited July 2013 in MTB workshop & tech
Hey everyone,

I have a 3 X 10 drivetrain with a shimano XT rear mech and SLX front derailleur.

I am being driven insane by chain slap when things get rough.

I was wondering if it is possible to fit a chain guide / tensioner to it, despite it having 3 chain rings?

If yes, can anyone recommend any models or types to look out for?

Thanks in advance

Comments

  • nicklouse
    nicklouse Posts: 50,675
    the rear mech is the tensioner. maybe one of these clutch rear mechs if yours is not already.

    or just wrap some old inner tube around the chain stay and ride the bike.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • joerodman
    joerodman Posts: 20
    My rear mech has a clutch system (which I have remembered to put in the on position) and I have got an inner tube cable tied to the chain stay
  • The Rookie
    The Rookie Posts: 27,812
    Put the chain on the largest ring at the front you can, this lifts the chain off the stay and also tensions it more and for the same gear ratio you'll be using a larger rear sprocket as well.....

    Sounds like your clutch is fubarred though......
    Currently riding a Whyte T130C, X0 drivetrain, Magura Trail brakes converted to mixed wheel size (homebuilt wheels) with 140mm Fox 34 Rhythm and RP23 suspension. 12.2Kg.

Categories