Fox Rear Shock iCD on a Spark 900 RC 2013 ?

eimart
eimart Posts: 52
edited June 2013 in MTB workshop & tech
Hello,

i saw a Scott Spark 900 RC 2013 with a Fox Rear Shock on internet.
i was thinking here. The Scott Twinlock System comes with 3 different pieces from different color (red, orange and blue), depending on the brand of front fork suspension you are going to you you need to change this piece in twinloc system.

But if i want to change the rear shock from the original Dt Dwiss to a FOX CTD.
Do i need to contact Scott and buy a different part specially made for FOX rear shock ?
Or i just need to remove the Dt Nude and install the Fox shock ?

Thanks !

Comments

  • eimart
    eimart Posts: 52
    I will need to know the "stroke" and "eye-to-eye" measurements of the Spark 900 RC 2013 Frame.
    I need this information because i am looking for a FOX rear shock to replace the Dt Dwiss Nude 2 that came with the bike.
  • cooldad
    cooldad Posts: 32,599
    So measure the shock you have. I might be missing something, but isn't replacing the shock on a 2013 bike a bit premature?
    I don't do smileys.

    There is no secret ingredient - Kung Fu Panda

    London Calling on Facebook

    Parktools
  • eimart
    eimart Posts: 52
    i am thinking about this one:

    http://www.jensonusa.com/Fox-Float-CTD- ... Valve-2014

    Yes it is premature, but ive already raced 9 races with this Dt Dwiss and i am not enjoying it. :)
  • eimart
    eimart Posts: 52
    6.5" x 1.5" , Standard Volume

Categories