shimano m575

gazeddy
gazeddy Posts: 305
edited April 2013 in MTB workshop & tech
is there any way of improving these im now running them up front on a 203mm rotor. and they are still weak and feeble. i have organic pads. bleed kit is on its way
I rode what you dug last summer

Comments

  • supersonic
    supersonic Posts: 82,708
    Bleeding them ;-)

    They are good brakes, makes sure nothing is contaminated ie pads and rotor.
  • gazeddy
    gazeddy Posts: 305
    both are new and bedded in together.
    I rode what you dug last summer
  • cooldad
    cooldad Posts: 32,599
    Unless the lever is spongy bleeding isn't going to give you more power.
    I don't do smileys.

    There is no secret ingredient - Kung Fu Panda

    London Calling on Facebook

    Parktools
  • gazeddy
    gazeddy Posts: 305
    lever isnt spongy but it has about a fair bit of travel before operating brakes but that is in the lever not the caliper
    I rode what you dug last summer
  • The Rookie
    The Rookie Posts: 27,812
    Pads are probably sitting too far off the disc, just use them for a bit....

    Can you see a gap between pad and disc?
    Currently riding a Whyte T130C, X0 drivetrain, Magura Trail brakes converted to mixed wheel size (homebuilt wheels) with 140mm Fox 34 Rhythm and RP23 suspension. 12.2Kg.
  • gazeddy
    gazeddy Posts: 305
    Just barely less than a mm gap total
    I rode what you dug last summer
  • cooldad
    cooldad Posts: 32,599
    The gap should be almost nothing. So what Beginner said.
    I don't do smileys.

    There is no secret ingredient - Kung Fu Panda

    London Calling on Facebook

    Parktools
  • JohnBurt
    JohnBurt Posts: 94
    and if that don't work advance the pistons in the callipers - just search on here.