Small problem.

Sollac
Sollac Posts: 5
edited March 2013 in MTB workshop & tech
bike3.jpg

I have just fitted some big betty tires to my felt Q650. Problem is the tires are mahoosive and catch the vbrake noodle.

i have thougth about putting washers underneath the cable to raise it on the clamp side...

any other suggestions that do not involve a new brake system and rims :P

Comments

  • nicklouse
    nicklouse Posts: 50,675
    some sensible sized tyres.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • Sollac
    Sollac Posts: 5
    there is that, but not gonna happen :P
  • warpcow
    warpcow Posts: 1,448
    Sollac wrote:
    there is that, but not gonna happen :P

    Well, the other option is to change to disc brakes.
  • benpinnick
    benpinnick Posts: 4,148
    Bend the noodle tighter. Still going to be an issue when its muddy though.
    A Flock of Birds
    + some other bikes.
  • nicklouse
    nicklouse Posts: 50,675
    benpinnick wrote:
    Bend the noodle tighter. Still going to be an issue when its muddy though.
    will not change a thing.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • njee20
    njee20 Posts: 9,613
    +potato for appropriate tyres for a bike of that ilk!
  • The Rookie
    The Rookie Posts: 27,812
    benpinnick wrote:
    Bend the noodle tighter. Still going to be an issue when its muddy though.
    Think first, type later...wire goes from where it exits the end of the noodle (dictated by the stop not the noodle).

    Tyres are wrong for the bike, fit the right tyres, problem solved.
    Currently riding a Whyte T130C, X0 drivetrain, Magura Trail brakes converted to mixed wheel size (homebuilt wheels) with 140mm Fox 34 Rhythm and RP23 suspension. 12.2Kg.
  • swod1
    swod1 Posts: 1,639
    fit a smaller tyre to the rear and keep the chunky one on the front.

    I made the mistake of fitting a xr4 2.2 tyre to my trek and in muddy bits the frame packed up.
  • cooldad
    cooldad Posts: 32,599
    I'm more concerned about the white brake blocks.
    I don't do smileys.

    There is no secret ingredient - Kung Fu Panda

    London Calling on Facebook

    Parktools
  • pesky_jones
    pesky_jones Posts: 2,890
    Who said they had to be black? Racist.
  • warpcow
    warpcow Posts: 1,448
    Isn't the tyre on backwards too (not that there's anything necessarily wrong with that)?
  • Sollac
    Sollac Posts: 5
    tyres are on correctly.

    chainstay clearance isnt massive, but enuff for the tracks/trails i frequent..

    swapped to a set of shimano v brakes and clearance issue for now is resolved.. thanks
  • Giraffoto
    Giraffoto Posts: 2,078
    Unless the picture is misleading you're going to have issues with your chainstay clearance as well. (Is that a chainstay protector on the non-drive side, by the way?) It looks as if sticky mud is always going to be a problem with that tyre/frame combination
    Specialized Roubaix Elite 2015
    XM-057 rigid 29er
  • 02gf74
    02gf74 Posts: 1,168
    this exact problem came up on antoerh bike forum - it was suggested to raise the cable clamping point by using washers and maybe a longer bolt ..... wouldn't recommend it myself but as it is rear tyre, it may be worth a try.

    don't mees with the front coz if something goes wrong and the front wheel locks up, you are over the bars heading for some expensive dental work.