C456 to 1x10 what do I need to stop my chain flying off?
Astrozombies!
Posts: 55
Currently running hollowtechII cranks with bash in place of outer ring. Want to ditch front mech and granny ring and run 1x10 instead but not sure what I need to stop the chain jumping off given that the front mech won't be there anymore. Any advice appreciated,
Rob
Rob
0
Comments
-
Leave the mech on.I don't do smileys.
There is no secret ingredient - Kung Fu Panda
London Calling on Facebook
Parktools0 -
Need it on another bike0
-
There's a good chance the plasma wont work if your using slx cranks (and maybe others). The adaptor you'll need will make it foul the cranks.
You'll more than likely need a direct bb mount guide.0 -
Just run a top guide only and a shadow plus mech, or type 2 if you're running SRAM. I have an e13 xcx and a zee mech on my 456c and have had no issues so far, t'is a great setup!0
-
Check out the Raidium ring, BBG make a similar one, works well on Bromptons!Currently riding a Whyte T130C, X0 drivetrain, Magura Trail brakes converted to mixed wheel size (homebuilt wheels) with 140mm Fox 34 Rhythm and RP23 suspension. 12.2Kg.0
