Threadlock on headset?
Tricycleboy
Posts: 373
I have a campag threaded headset and it keeps loosening after only 30miles of riding. Without wishing to tighten it to the point that i feel i am in danger of damaging anything or a small slip rounding out the locknut, would a bit of threadlock on the locknut/ race threads help to prevent this undoing itself quite so easily? Its a 20 year old very good quality headset that after a recent cleaning is now running very smoothly so i'm loathe to change it for something else because of this small issue.
Any recommendations on a suitable product? Obviously i don't want it stuck fast forever, but remaining tight would definitely be a good thing.
Any thoughts/ help gratefully recieved!
Any recommendations on a suitable product? Obviously i don't want it stuck fast forever, but remaining tight would definitely be a good thing.
Any thoughts/ help gratefully recieved!
0
Comments
-
the washer with the tab that sits in the slot on a threaded steerer should stop it, never mind the locknut
the thread could be on its way out, the fork is steel and the headset is alloy, so odds on its the soft alloy parts
but make sure all the parts are there0 -
Will check the washer- although i don't recall it having a tab in it. There is a thin washer but maybe i am missing something else that goes between the upper race and the locknut.
Thanks0 -
Tricycleboy wrote:I have a campag threaded headset and it keeps loosening after only 30miles of riding. Without wishing to tighten it to the point that i feel i am in danger of damaging anything or a small slip rounding out the locknut, would a bit of threadlock on the locknut/ race threads help to prevent this undoing itself quite so easily? Its a 20 year old very good quality headset that after a recent cleaning is now running very smoothly so i'm loathe to change it for something else because of this small issue.
Any recommendations on a suitable product? Obviously i don't want it stuck fast forever, but remaining tight would definitely be a good thing.
Any thoughts/ help gratefully recieved!
http://www.parktool.com/uploads/images/ ... type18.jpg
I would not use any threadlock."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
yep definitely got all of that stuff nicklouse. Just the washer doesn't have a tab in it- which does sound like it would allow the rotation.
Think maybe a trip to the spares bin in the LBS maybe in order!
Thanks again0 -
Tarted up an old Peugeot with my son; replaced the rusted headset with a cheapo Ritchey one, but it wouldn't stay tight. (there's a tab on the washer but no groove in the fork) Wrapped a bit of plumber's PTFE tape round the threads and that's stopped it loosening.0
-
Thanks for the help folks. Took apart the headset from an old frame i had and nicked the washer with a tab and transplanted.
Tight as a drum now! Thanks for talking me out of the threadlock solution!0