rear mech help with double front really stuck
sadler89
Posts: 67
hi
sorry but may be being abit thick cannot figure out what length rear mech i need reading through other post
i am going to be using a double front 36/24 and rear either 11-32 or 11-34
any help would be great thanks tony
sorry but may be being abit thick cannot figure out what length rear mech i need reading through other post
i am going to be using a double front 36/24 and rear either 11-32 or 11-34
any help would be great thanks tony
0
Comments
-
36-24 = 12
+
34-11 = 23
Your new mech needs to cover 35 tooth capacity.0 -
What mech do you have now - if you are using it on a triple it will work.I don't do smileys.
There is no secret ingredient - Kung Fu Panda
London Calling on Facebook
Parktools0 -
Ok then thanks a lot think tht means I need a medium cage in SRAM mechs looking on oter posts and also have a specialized big hit which is single speed on the front 8 rear so looking to get double front and 9 rear to make it an all mountain rather than just a downhill cheers tony0
-
sorry last thing seen a sram x0 setup with someone and is a long cage mech would this work with the setup i have 35 tooth capacity when im looking it seems to come up with i need medium but would a long cage be ok thanks tony0
-
as long as it has a range of 35 or more and you have a sram shifer of the correct speed then yes."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
ok then thanks for all your help0