measuring rear axle length?
cube-dan
Posts: 6
Well I'm fairly new to this mountain biking lark but due to reliability issues an the fact I like shiney bits I'm in the market for buying some new wheels. I have been looking at hope pro 2 evo hubs on mavic 521 rims. I have come to ordering an it has asked me for the rear axle length (either 135 or 150mm). So I got some vernier caliper on the job an removed the skewer an sent the gauge down the inside to measure it an its showing 146.7mm? I imagine I am measuring the right section. Any help on this subject would be much appriciated.
Cheers Dan
Cheers Dan
0
Comments
-
-
2011 cube team limited mate0
-
Not the qr. the distance between the outer edge of the lock nuts0
-
Or the drop out width, but that width will be the same as the above when the qr is done up.0
-
measure the O.L.D
"Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
Cheers bud thats cleared it up for me, thanks0
-
sorted folks came out with 134.77mm which is good as 135mm, cheers for the advice folks much appriciated0