Giant MPH spare washer for reservoir
RICHARDJOHNLAKE
Posts: 4
Hi. Does anyone know where I could buy a spare washer, and the brass washer cover, that sits on the reservoir by the brake lever for Giant MPH brakes?
Or has somebody used a non-Giant part from somewhere else that has worked?
Or has somebody used a non-Giant part from somewhere else that has worked?
0
Comments
-
I need the same thing, they were coming up on Ebay. Original MPH were based on the Hope C2 - not sure about interchangabilty though.0
-
Thanks. I'll see if I can find anything on the C2s.0
-
After many hours scouring Google I found a replacement part for my brakes a year or so back from Ondrives. You need the M5 size. Also a word of caution, the original reservoir screw isn't long enough to grip this washer completely, so you should get longer M5 bottle cage bolt to go with it, with a 10mm thread. (http://i.imgur.com/Slhun.jpg)
http://www.ondrives.com/data/pdf/fasten ... ls/sws.pdf0 -
That's very good to know norm. I tried over a year ago to get some for an old set from Giant UK & they were discontinued then, so good to know there are alternativesnorm360 wrote:After many hours scouring Google I found a replacement part for my brakes a year or so back from Ondrives. You need the M5 size. Also a word of caution, the original reservoir screw isn't long enough to grip this washer completely, so you should get longer M5 bottle cage bolt to go with it, with a 10mm thread. (http://i.imgur.com/Slhun.jpg)
http://www.ondrives.com/data/pdf/fasten ... ls/sws.pdf0 -
For the record, these are no longer shown on the Ondrives website but are still available.
Phone them Tel: +44 (0)1246 455500 and ask for SWS-5, they come in packs of 10 for approx £18 incl postage0
