Specialized hardrock disc 2012

Nelson56
Nelson56 Posts: 79
edited June 2012 in Your mountain bikes
http://m1242.photobucket.com/albumview/ ... 0&newest=1
http://m1242.photobucket.com/albumview/ ... 1&newest=1
http://m1242.photobucket.com/albumview/ ... 2&newest=1

Frame: Specialized A1 Premium Aluminium, fully butted, disc only, 6061 alloy, double ORE down tube, externally relieved head tube, forged dropouts and reinforced disc mount, alloy replaceable derailleur hanger
Fork: SR Suntour XCT, 1pc. alloy lower, 28mm Hi-Ten stanchions, 1-1/8" Hi-Ten steerer, coil/mcu spring with preload adjust, 80mm travel
Front Derailleur: Shimano Altus, 8-speed, 34.9mm clamp, top-swing, dual-pull
Rear Derailleur: Shimano Altus, 8-speed, SGS cage
Number of Gears: 24
Shifters: Shimano Altus, 8-speed Rapidfire plus, SL type with optical display
Chainset: SR Suntour XCT, 8-speed, square taper spindle
Chainrings: 42/32/22, replaceable outer, with chainguard
Bottom Bracket: Square taper, cartridge bearing, double crank stop
Cassette: Shimano 8-speed, 11-34t
Chain: KMC X-8, 8-speed, reusable Missing Link
Pedals: Composite platform with moulded pins, toe clip compatible, 9/16" with reflectors
Front Brake: Tektro Novela mechanical disc brake, dual pad angle adjust, post mount, 160mm rotor
Rear Brake: Tektro Novela mechanical disc brake, dual pad angle adjust, post mount, 160mm rotor
Brake Levers: Tektro, die cast lever, included with brake
Handlebars: Hi-Ten riser bar, 35mm rise, 8 degree backsweep, 4 degree upsweep, 25.4mm
Stem: Ahead, 4 bolt clamp, 20 degree rise, 25.4mm
Headset: 1-1/8" threadless, loose ball with seals
Grips: Specialized Enduro, dual compound
Rims: Alex HR Disc 26", alloy double-wall, disc, pin joint, 24mm, 32h
Front Hub: Disc hub, QR axle, sealed loose ball, 17mm contact, 32h
Rear Hub: Sealed loose ball, 19mm contact, QR, 32h
Spokes: Stainless silver, 2.0mm (14g)
Front Tyre: Specialized Fast Trak LK Sport, 60 TPI, wire bead, 26x2.0"
Rear Tyre: Specialized Fast Trak LK Sport, 60 TPI, wire bead, 26x2.0"
Saddle: Specialized Body Geometry Hardrock, steel rails, front and rear bumpers, 143mm width
Seatpost: Alloy, 2 bolt head, 30.9mm, 12.5mm offset, micro adjust
Seat Binder: 34.9mm, alloy, extruded QR lever/collar
Accessories: Reflectors, clear coat, owners manual
Weight: 14.35kg (31.57lbs) approx for the 17 Inch size, i have not changed anything on this bike yet
Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail

viewtopic.php?f=10017&t=12858984

Comments