Help... Shimano Tourney set up

chewitt11
chewitt11 Posts: 84
edited April 2012 in MTB workshop & tech
Hi all,

Am having major problems setting up the rear mech adjustment. The Hi & Lo screws are fine its the cable adjustment for up and down.

Is there something different to normal set up, it just wont click through the gears properly. Its a new cable and been lubed.

Any help would be good.

:?: :?:
http://www.swbikemechanic.co.uk ,SW Bike Mechanic is a mobile Bicycle workshop specialising in repairs and servicing for cycles in the Weston Super Mare and Somerset area
http://www.bicycle-mechanic.co.uk

Comments

  • nicklouse
    nicklouse Posts: 50,675
    Setup is no different to any other.

    Sounds like poor routeing,to much friction or just poor set up.

    Which way are you having shift issues. Pulling the cable with the over or with the spring pulling it?
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • cooldad
    cooldad Posts: 32,599
    No different to any other Shimno mech. Could you be more specific - what is actually happening, or not happening.
    I don't do smileys.

    There is no secret ingredient - Kung Fu Panda

    London Calling on Facebook

    Parktools
  • chewitt11
    chewitt11 Posts: 84
    Am thinking its the outers,

    It seems to change down ok but its the up... only seems to have a barrel adjuster on the mech not on the shifter????
    http://www.swbikemechanic.co.uk ,SW Bike Mechanic is a mobile Bicycle workshop specialising in repairs and servicing for cycles in the Weston Super Mare and Somerset area
    http://www.bicycle-mechanic.co.uk
  • nicklouse
    nicklouse Posts: 50,675
    chewitt11 wrote:
    Am thinking its the outers,

    It seems to change down ok but its the up... only seems to have a barrel adjuster on the mech not on the shifter????
    So only half a cable change then.

    That will be he problem.

    You only need one adjuster.

    What is up and what is down.

    Up to 1 or up to 789?
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • chewitt11
    chewitt11 Posts: 84
    Up is small to large and down is large to small....

    thought 1 adjuster was right, will do outers that should sort it out...
    http://www.swbikemechanic.co.uk ,SW Bike Mechanic is a mobile Bicycle workshop specialising in repairs and servicing for cycles in the Weston Super Mare and Somerset area
    http://www.bicycle-mechanic.co.uk
  • The Rookie
    The Rookie Posts: 27,812
    Up in a car is to a higher number gear isn't it.......

    So it will shift to the smaller gears OK but not the largers.

    Is it a rapid rise mech which shifts to the biggest gear with no cable pull? If not it is NOT a cable issue, just your setup.
    Currently riding a Whyte T130C, X0 drivetrain, Magura Trail brakes converted to mixed wheel size (homebuilt wheels) with 140mm Fox 34 Rhythm and RP23 suspension. 12.2Kg.
  • chewitt11
    chewitt11 Posts: 84
    OK,

    All sorted, outers and a loose Jockey wheel......

    Thanks for all your input guys..
    http://www.swbikemechanic.co.uk ,SW Bike Mechanic is a mobile Bicycle workshop specialising in repairs and servicing for cycles in the Weston Super Mare and Somerset area
    http://www.bicycle-mechanic.co.uk