Spesh FSR bearings

flappy8
flappy8 Posts: 172
edited October 2011 in MTB workshop & tech
Do you need any special tools to get the bearings out of the frame and linkages? Anyone found any good articles on line? The only ones I can find refer to v old versions. Mine's a 2010.
MTB or Road - They are both good!

Comments

  • lordmerchant
    lordmerchant Posts: 378
    I used sockets, a punch, and copper head mallet and a soft touch, as long as you are careful and knock, tap bearings in evenly you should be ok
  • griffter18
    griffter18 Posts: 53
    should use a press but it can be done with a drift but if you get it wrong you may need a new frame.

    RRP have brought a press out for £50 but you need a few other bits (£20). They also do bearing kits
    http://www.rapidracerproducts.com/BPET.htm

    Also try BETD theyll do the job for you.
    Specialized Enduro 2010 -custom
    Specialized Stumpjumper Elite 2009
    Specialized Hotwalker - start them young

    Jamis Xenith Comp - Road

Categories