Paulus Quiros custom road frame
ynyswen24
Posts: 703
http://www.flickr.com/photos/mike-531/6 ... 443239362/
Here's my Custom and partly self built road frameset. No white garage door to take the photo against so I hope the dry stone walling meets the required standards.
Reynolds 525 tubeset
Stainless steel dropouts from Ceeways
Investment cast lugset from Ceeways
10spd Campag Centaur groupset with 50/34 chainset, 12-26 cassette
Campag Proton wheels with Michelin front, Schwalbe rear tyre (currently)
Velo Orange Headset, 1 1/8" threadless external
P-X bars and stem (10cm stem to be replaced with 11cm)
Condor Cork Bartape
Look Keo Classic pedals
Brooks Swift saddle, steel rails
Rotor chaincatcher
Blackburn Stainless Steel botle cages
Metalwork by Jose and myself, brazing and painting by Jose at Paulus Quiros Design
http://paulusquiros.co.uk/
Here's my Custom and partly self built road frameset. No white garage door to take the photo against so I hope the dry stone walling meets the required standards.
Reynolds 525 tubeset
Stainless steel dropouts from Ceeways
Investment cast lugset from Ceeways
10spd Campag Centaur groupset with 50/34 chainset, 12-26 cassette
Campag Proton wheels with Michelin front, Schwalbe rear tyre (currently)
Velo Orange Headset, 1 1/8" threadless external
P-X bars and stem (10cm stem to be replaced with 11cm)
Condor Cork Bartape
Look Keo Classic pedals
Brooks Swift saddle, steel rails
Rotor chaincatcher
Blackburn Stainless Steel botle cages
Metalwork by Jose and myself, brazing and painting by Jose at Paulus Quiros Design
http://paulusquiros.co.uk/
0
Comments
-
Classy looking ride, mate. Even looked good as a box of tubes
Start with a budget, finish with a mortgage!0 -
Thank you, I made sure the tyre transfers and valves line up, the valves are at 12 o'clock, the cranks line up with the seatstay and the chain is on small rear/large front. I want it to look it's best...
The first bike I've had where I've had the balls to put my name on the top tube!0
