Oops Snapped Monarch inflation banjo valve

gtd.
gtd. Posts: 626
edited February 2011 in MTB workshop & tech
2n1vtxu.jpg

Will an easy out remove whats left? then just a Monarch Service Kit (basic) from TF?

37a6725d-ef45-4928-be95-9bd000ebc250_600x450.jpg
Mountain: Orange Patriot FR, SubZero & Evo2LE.
Road: Tifosi Race Custom.
Do it all bike: Surly Disc Trucker 700c/29er

Comments

  • nicklouse
    nicklouse Posts: 50,675
    could do. but it all depends on the operator. but a full strip down and clean out will be needed as there will be bits in the shock.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • gtd.
    gtd. Posts: 626
    Just removed the air can and realised I could drive the broken bit of fitting through into the aircan with a very thin woodscrew then unthread the broken bit offthe woodscrew looned at theo seals the all seam fine but I'll replace them when I get the kit unless I can find just the swivel somewhere.
    Mountain: Orange Patriot FR, SubZero & Evo2LE.
    Road: Tifosi Race Custom.
    Do it all bike: Surly Disc Trucker 700c/29er
  • garethld
    garethld Posts: 18
    i always thought snapping ones banjo was something else and v.painful?
  • gtd.
    gtd. Posts: 626
    Lol this is kind or painful... I cant go for a ride fill parts come :cry:
    Mountain: Orange Patriot FR, SubZero & Evo2LE.
    Road: Tifosi Race Custom.
    Do it all bike: Surly Disc Trucker 700c/29er

Categories