headshok psi

dandel36
dandel36 Posts: 70
edited January 2011 in MTB workshop & tech
hi all
Anyone out there advise me on the psi for the cannondale super fatty dl forks. i wheigh 180lbs been on the websites and some say 80-90 and sme say 120-125 psi. its a f4
cheers
dandel
dale prophet sl
dale f4
boardman urban

Comments

  • nicklouse
    nicklouse Posts: 50,675
    TBH what ever pressure you need to give the sag you need.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • RevellRider
    RevellRider Posts: 1,794
    Cannondale forks are half your weight in pounds plus 10%, so I'd go for around 100psi to start off with

    Nick, how do you measure sag on a headshox fork?
  • nicklouse
    nicklouse Posts: 50,675
    easy measure the saging bit.

    the crown to something measurement will do fine, in fact any measurement that crosses the "divide" will do. so the difference in the distance from your axle to bars when worked with the headshok travel will do just fine.

    works on "normal" forks as well.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown