mudguard boss thread stripped
Comments
-
Assuming you're meaning the one on the dropout, use a P-clip on the seatstay.0
-
P-clip or see if you can find someone to fit an 5mm HelicoilMake mine an Italian, with Campagnolo on the side..0
-
Chase the threads or cut one size larger, both of which require the right tools.0
-
constantly reavalueating the situation and altering the perceived parameters accordingly0
-
"Timesert" for a permanent repair that will be better than original.Jens says "Shut up legs !! "
Specialized S-Works SaxoBank SL4 Tarmac Di20 -
Put a nut on the other side0
-
+1SheffSimon wrote:Put a nut on the other side0 -
Lidl have a tap and die set from M3 to M12 nuts and bolts for £6. an absolute bargin...
worth a try0 -
Hi
You can buy a M5 Helicoil thread repair kit on ebay for £15.
It would give you a permanent solution and the thread would be stronger than original.
0 -
i had forks, bosses imperial size, lbs tapped them to metric, no charge, new bolts - too cheap to even remember!Bikes, saddles and stuff
http://www.flickr.com/photos/21720915@N03/
More stuff:
http://www.flickr.com/photos/65587945@N00/
Gears - Obscuring the goodness of singlespeed0 -
put a bolt through from the inside and use a nut & washer for attachmentSheffSimon wrote:Put a nut on the other side0
