need help with bottom bracket what tool or tools do i need
D4ND4R3
Posts: 5
hi i am taking this bottom bracket apart to replace bearings but not sure if i need a special tool or tools .
i have included 2 pics of left and right hand sides .
the left hand side is 2.5cm the right is 3.5 is there a special tool i need i used a adjustable spanner but it must have been week as it shreded the sides of the spanner .
look forward to your comments .
d4nd4r3
i have included 2 pics of left and right hand sides .
the left hand side is 2.5cm the right is 3.5 is there a special tool i need i used a adjustable spanner but it must have been week as it shreded the sides of the spanner .
look forward to your comments .
d4nd4r3
0
Comments
-
a bit of this
http://www.parktool.com/blog/repair-hel ... et-service
and a bit of the other.
http://www.parktool.com/blog/repair-hel ... et-service
note the thread direction."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
found out that i need the park tools hcw3 and hcw4 found and purchased the hcw4 but cant find the parktools hcw3 any where in the uk .
found it on the park tools web site its discontinued has any one seen one for sale in the uk ??????0 -
The HCW3 is a 36mm spanner. Cyclo/Weldtite do one in their range of tools part no 06360.I've added a signature to prove it is still possible.0
-
I GOT THE 36MM ON HCW4 ITS THE 25MM END ON THE HCW3 THAT I NEED0
-
hi all i have manage to locate one direct from park tools for £11 all in delivered to uk from usa , appaerently this tool has been discontinued for 5 five years but they have a small stock of them .so if you want one contact park tool co. via email (reo@parktool.com)
a big thank you to all that helped especialy roger olson at park tool company
just hope the job gose smoothly now will let ya know once all tools arrive0 -
-
I have an army surplus adjustable, 0-50.8mm with an 18" long arm, sorted!
SimonCurrently riding a Whyte T130C, X0 drivetrain, Magura Trail brakes converted to mixed wheel size (homebuilt wheels) with 140mm Fox 34 Rhythm and RP23 suspension. 12.2Kg.0