Avid won't bleed
downhillholty
Posts: 232
hi guys, im building my DH rig up for winter, and im using my codes from my hardtail, i only had the rear on my hardtail and the front brake has been sitting around for a year or so, recently i fitted goodridge hoses to the brakes but never bothered to bleed the front one as i wasn't using it.
My problem is, is that when trying to push fluid from the caliper up from the caliper to the lever, there is no free movent of fluid, it's as if the clip on the suringe is closed when its not, just something won't let the fluid through. Fitted the back one a while ago and it bled through fine and had no probs, so im not sure whats the problem with the front.
Any ideas??
cheers ben
My problem is, is that when trying to push fluid from the caliper up from the caliper to the lever, there is no free movent of fluid, it's as if the clip on the suringe is closed when its not, just something won't let the fluid through. Fitted the back one a while ago and it bled through fine and had no probs, so im not sure whats the problem with the front.
Any ideas??
cheers ben
Go big or go home!!
dmr exalt
fitbike team park bmx
both my custom jobbys
:D
http://www.pinkbike.com/photo/2915789/
dmr exalt
fitbike team park bmx
both my custom jobbys
:Dhttp://www.pinkbike.com/photo/2915789/
0
Comments
-
damaged hose?
stuck piston in the lever assy? lever in the correct position?"Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
hose is new and not damaged,
levers in the right position,
got to strip the lever tommorow and see if the pistons stuck but just wondered if it could be anything else really.Go big or go home!!
dmr exalt
fitbike team park bmx
both my custom jobbys:D
http://www.pinkbike.com/photo/2915789/0 -
I had a similar issue with my juicy 7s. Turned out if you wind out the pad adjustment all the way it sometimes blocks the reservoir off. If you maybe turn it so it's half open/closed it opens up the valve and fluid can get through. Might have been the way mine were setup but I dismantled the lever and tweaked the mechanism inside so that it was part open.
Hope it helps, think codes have the allen key pad adjuster thing?0 -
ah nice one mate ill try that first then, erm well they have the pad contact adjuster knob if thats what you mean?Go big or go home!!
dmr exalt
fitbike team park bmx
both my custom jobbys:D
http://www.pinkbike.com/photo/2915789/0 -
Yeah the red thing (normally) on the lever body. Mine is a knob but sometime they need an allen key (weight weenies like them!)
Hope it helps, drove me mad. :shock:0 -
lol well i can certify my ride aint for a weight weenie!!
yeah cheers mate if it dont work i'll end up posting in here again so watch this space!Go big or go home!!
dmr exalt
fitbike team park bmx
both my custom jobbys:D
http://www.pinkbike.com/photo/2915789/0 -
you have got the lever clamped closed, haven't you?0
-
Your lever piston is stuck forwards. Because of the spring it feels OK to work the lever but it really is not. When not being used the hydraulic fluid tends to go jelly-like and gummy. Just been there, done that.
Not really anything to do with lever clamped, adjuster, or anything else.Giant Reign X10 -
all sorted now guys was just the pad contact adjuster, damn thing!!Go big or go home!!
dmr exalt
fitbike team park bmx
both my custom jobbys:D
http://www.pinkbike.com/photo/2915789/0
