saint M800 hub bearings renewal
gnusmas
Posts: 167
does anyone know of any diagrams or instructions on replacing/serviving hub bearings front and rear for saint M800 hubs? Mine could do with a good service but not having done one of these before would like to have an insight before doing it.
also, any ideas which bearings i would need to get if i had to replace them? can you put sealed bearings in?
cheers
also, any ideas which bearings i would need to get if i had to replace them? can you put sealed bearings in?
cheers
0
Comments
-
cone and cup bearings.
undo and remove cones.
exploded views can be downloaded from Shimanos tech pages.
they even list the bearing sizes."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
didn't think to check there
will do it now
cheers0 -
any ideas where i can get the TL-HA20 tool that i obviously need?0
-
"Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
google's top results are people asking where to get one from0
-
it has changed.
when posted it was Tweeks cycles and there are a few further down."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
funniest thing is that this very thread was one of the top results!0