Race Face evolve xc crankset removal

beany123 · July 2010

Hey guys,

Im tryin to remove my raceface evolve xc crankset but cant get it off!! ive undone the 8mm bolt on drive side and my ccp-22 puller is no good, anyone know of the correct tool part no. i should use or how to get these things off ,

thanks

supersonic · July 2010

It should come with a self extracting crank bolt.

Is it the X type, or ISIS unit?

nicklouse · July 2010

as above put the extracting ring back on and then when you undo the 8mm bolt it causes the arm to be pulled off.

there are no extracting tools to fit.

beany123 · July 2010

sonic- not sure which one it is will try to upload a pic to show which one i have, am i right in thinking then then if counter clockwise undoes the 8mm bolt, clockwise should push the crank off?? it tightens up obviously when i re thread the bolt in so shall i just give it some wellie past this point to try and pop the crank??? meanwhile i shall upload a couple of pics

nicklouse · July 2010

http://www.parktool.com/repair/readhowto.asp?id=171

have a read.

beany123 · July 2010

thanks nick but i dont think i have this self extracting crankbolt mine defo only has the 8mm bolt pls check this pic and let us know what you think mate cheers, ps can upload another pic with bolt removed

peter413 · July 2010

Thats not a self extracting bolt

ddraver · July 2010

you need an ISIS Crankpuller an a sugar load of force.......The self extracting bolt has a horrible habbit of shearing off in my experience!

nicklouse · July 2010

old skool then it needs a crank extractor.

so either
http://www.parktool.com/repair/readhowto.asp?id=120

or

http://www.parktool.com/repair/readhowto.asp?id=103

beany123 · July 2010

sweet just ordered a ccp-44 crank puller

thanks

Race Face evolve xc crankset removal

Comments

Categories