new project..

nicklouse
nicklouse Posts: 50,675
edited May 2012 in Your mountain bikes
this is going to be an odd ball. and may take some time.

also it is not really an MTB.

initially it was going to be a rat/fixed/pub bike with a front disc.

it still is going to be so but i am going to look at going internal on the hose and strip and paint the frame. Now i know the odd frame painter/artist.....

so build what have i got? well one 16T disc mount cog and a front disc brake.

frame will still be from the scrap pile but the fork needs to be steel to accept the modding that will be needed for the disc mount and internal routing of the hose.

will update as the bits arrive or and selected.
"Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown
«13456

Comments

  • El Capitano
    El Capitano Posts: 6,401
    Interesting...

    Wouldn't running the brake hose inside the fork weaken it somewhat?
  • nicklouse
    nicklouse Posts: 50,675
    but if you take an over engineered fork to start with? likewise the bars :wink:
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • El Capitano
    El Capitano Posts: 6,401
    I take your point and I assume you're not going to be doing anything too extreme on it.

    Are you routing the hose through the bars as well?
  • nicklouse
    nicklouse Posts: 50,675
    that is the plan.

    well been rummaging in the scrap bikes to see what might be suitable.

    surprisingly there was nothing.

    but I have managed to kill two birds with one stone.

    I will be using the frame and possibly the forks (if i can work out the brake routing) the wheels and cranks will be going onto a 20 year old bike that needs gears and a brake.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • nicklouse
    nicklouse Posts: 50,675
    edited July 2010
    Parts list:

    Frame: yes
    Forks: yes
    Bars: Mmm something very swept back
    Stem: not sure yet.
    Headset: internal
    Grips: something nice
    Bar Ends: yes.

    Front Brake Lever assy: Shimano XT
    Front Caliper: Shimano XT
    Front disc: 160mm
    Rear Brake Lever assy: N/A
    Rear Caliper: N/A
    Rear Disc: N/A
    Hoses: Shimano metal braided.


    Shifters: N/A
    Cables: N/A
    Front Mech: N/A
    Rear Mech: N/A
    Chain Device: N/A

    Seat: Brooks
    Seat Post: Shaman
    Seat Post Clamp: integrated.

    Cranks: Truvative
    Chainring(s): Middle burn
    Chain: big and Fat
    Cassette: VeloSolo Disc Cog 16T
    Pedals: yes
    Bottom Bracket: GXP

    Front Wheel: Hand built
    Rim: ?
    Spokes: ?
    Hub: XT
    Tube: ?
    Tire: Twinrail 700C 24mm

    Back Wheel: Hand Built
    Rim: ?
    Spokes: ?
    Hub: Front 20mm Diatec
    Tube: ?
    Tire: Twinrail 700C 24mm
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • nicklouse
    nicklouse Posts: 50,675
    oh and the frame will be this one.

    img0172br.jpg
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • nicklouse
    nicklouse Posts: 50,675
    oh any thoughts on colour?

    need to do some serious modding to the fork as i need it to be aheadset compatible not threaded.

    old skool XT lever
    img0758c.jpg

    newer caliper

    img0759cx.jpg

    and old skool metal finish (great for the paint finish) hose.

    img0760ny.jpg
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • bluechair84
    bluechair84 Posts: 4,352
    when you say artist, what kind of thing do you want to do on the bike? I originally wanted a bike with large tubes so I could set my artist girlfriend to work on creating me something unique - then i ended up with the Ellsworth with comparatively narrow tubes to the 08 Enduro I was thinking about.

    We're looking at using Jon Burgerman as our inspiration;
    5681_jon_burgerman_wallpape.jpg

    He creates lots of doodle monsters which I quite like 8)
  • El Capitano
    El Capitano Posts: 6,401
    nicklouse wrote:
    oh any thoughts on colour?

    Two thoughts:

    Stealthy matt black. The same for as many components as possible.

    Or, bright Bright green - and get the twinrails in the same colour.
  • Laurence25
    Laurence25 Posts: 334
    El Capitano "Stealthy matt black" + carrot
  • nicklouse
    nicklouse Posts: 50,675
    nicklouse wrote:
    oh any thoughts on colour?

    Two thoughts:

    Stealthy matt black. The same for as many components as possible.

    Or, bright Bright green - and get the twinrails in the same colour.

    have the TW's already Purple and i hate matt black as it is a bugger to clean.

    but lets see.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • hbrashaw
    hbrashaw Posts: 286
    Won't you get internal cable rub with that?
  • nicklouse
    nicklouse Posts: 50,675
    hbrashaw wrote:
    Won't you get internal cable rub with that?

    where? how? nope.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • nicklouse
    nicklouse Posts: 50,675
    right work has started on the fork.

    need to change it from a 1 1/8th threaded fork to a 1 1/8th Aheadset fork.
    Also needs lo lose the V brake mounts.

    img0762qm.jpg

    no the mounting of the caliper woll be fun.

    thought i had an adaptor made up but the angles were way off.

    but will be something like this when done.

    img0763nz.jpg

    just a bit of welding to do tomorrow.


    and i need to make a 130mm X 20mm axle.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • El Capitano
    El Capitano Posts: 6,401
    So you're mounting the caliper on the right-hand leg?
  • cat_with_no_tail
    cat_with_no_tail Posts: 12,981
    I must admit, this is all a little beyond my feeble mechanical comprehension. I'm know that Nick knows more about this sort of thing than anyone I've ever come across though, so I'm sure it'll be very interesting to watch.
  • nicklouse
    nicklouse Posts: 50,675
    yep the caliper is going on the right leg , front.

    steerer extended. plug welded and seam welded.
    img0178qu.jpg

    has been ground down since.


    the seat post and saddle are just to get a feel.

    img0180l.jpg


    Bars maybe... wheels just for looks as they are in the shop for repair and have a broken spoke.

    "grips" just as bump stops.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • nicklouse
    nicklouse Posts: 50,675
    so this afternoon it was disc brake mount time.

    first make a reinforcing plate and attach.

    img0181x.jpg

    then make and fit the caliper mounts.

    img0184s.jpg

    then put together till tomorrow.

    img0185t.jpg
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • Anonymous
    Anonymous Posts: 79,667
    I'm curious.
    Are you mounting the callipper on the front to prevent any chance of the QR opening itself?
  • nicklouse
    nicklouse Posts: 50,675
    nope. just cause I can.

    it also will make the fender fit better.

    and it is where they should have been from the start.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • Anonymous
    Anonymous Posts: 79,667
    fairynuff.
  • nicklouse
    nicklouse Posts: 50,675
    edited July 2010
    Right today has been finishing off a few bits.

    like the brake hose routing.

    img0766t.jpg

    how to cover the hole?

    img0768h.jpg

    img0767u.jpg

    and

    img0769q.jpg

    graphics are history as is the load carrier and the front fender is back on.

    next job strip back down and paint.

    and build some wheels. :wink:
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • Spugnut
    Spugnut Posts: 128
    Looking good Nick. I'm intrigued to see how this turns out.
    Happy trails.
  • nicklouse
    nicklouse Posts: 50,675
    new rims ordered. black. 32 spoke and disc only.
    tyres ordered black and bald.

    need to steal a dremel of a mate.

    found some powder coaters.....
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • Love it! especially the internal cable for the front brake,
    love the reasoning behind it too, 'Because i can' spot on!!!
    Timmo.
    After all, I am Cornish!
    http://cornwallmtb.kk5.org/
    Cotic Soul, The bike of Legends!:wink: Yes, I Am a bike tart!
    http://www.bikeradar.com/forums/viewtop ... 1#16297481
  • Dick Scruttock
    Dick Scruttock Posts: 2,533
    Plug weld/braze the hole?
  • nicklouse
    nicklouse Posts: 50,675
    Rick the issue is the hose can not be removed for the welding. i had to make the hole in order to fit the hose. why well they are old stock shimano metal braided hoses with NO plastic coating. So there was noway they would be sold.

    so water/oil and even liquid nitrogen have been thought of.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • Anonymous
    Anonymous Posts: 79,667
    here's two ideas, Nick.
    Attatch a piece of string to the brake cable, and pull it through, leaving only the string/wire/whatever you've used running from the lever to the calliper.
    Then weld the hole up.
    Now, use the string or whatever to pull the hose back through the fork, and re-attatch.

    OR.
    See if you can find a rubber grommet that would fit it. I'm thinking of the kind that you'd use to blank off holes in electrical boxes. If you have a nearby electrician's suppliers, they should have something to fit.
  • nicklouse
    nicklouse Posts: 50,675
    the string wont work as the hose has pre crimped banjos which is why i need the hole in the first place....

    Gromets been thought of and is on the back burner..
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • Anonymous
    Anonymous Posts: 79,667
    hmm. how did you get the hose through? I think I must be missing something, but I can't figure out why you couldn't pull it through.