Disc brake mounts too narrow eek!

friendlyfire
friendlyfire Posts: 20
edited June 2010 in MTB beginners
Cutting to the chase...

Brought new sus forks to upgrade my bike and overlooked the brake mount dimensions. The mounting holes on the Recon Race forks are 60mm apart but the no frills Tektro Novela disc brakes on my bike have the mount holes further apart. Recons were a bargain at £180 so I'm feeling a bit silly now :lol:

Is there anything I can do to remedy this problem other than buying new brakes? Some kind of spacers?

Thanks a lot guys

Comments

  • BigStu2
    BigStu2 Posts: 794
    You'll need a disc brake adaptor, See page 3 below, your LBS should be able to match up one to suit.
    http://www.tektro.com/04support/pdf/Novela-English.pdf
    .........all
    ...at........work
    fun..................&
    ..no.............no
    .....is......play
  • friendlyfire
    friendlyfire Posts: 20
    Is there anything I can do to remedy this problem other than buying new brakes? Some kind of spacers?

    Found that Hayes do mount adaptors to sort this problem. In the words of Alan Partridge; Lovely stuff.
  • friendlyfire
    friendlyfire Posts: 20
    Thanks big stu, literally posted that same time you did :D

Categories