wheel build advice
scotto-maximo
Posts: 13
im looking at replacing the standard wheels on my commencal maxmax both with 10mm axles and its a single speed which i wanna keep. ive got a budget of £200, an idea of what i want just not idea if they will go together. so heres what ive been looking at;
halo combats (rims),
fire eye excellerant hubs
front: f920t
rear: rs 10
any advice would be greatly appreciated
halo combats (rims),
fire eye excellerant hubs
front: f920t
rear: rs 10
any advice would be greatly appreciated
0
Comments
-
Just watch out with the rear hub... it's standard spacing, but needs a longer axle because of the brake adaptor/chain tugs.
My maxmax is in my sig (DJ), i just built a new rear wheel round the original hub to save on hassle.What We Achieve In Life, Echoes In Eternity0 -
-
Torres wrote:Just watch out with the rear hub... it's standard spacing, but needs a longer axle because of the brake adaptor/chain tugs.
My maxmax is in my sig (DJ), i just built a new rear wheel round the original hub to save on hassle.
couldnt you take the disc mount off and run some slimmer chain tensioners? i run v's so dont want the disc mount on really and what size spokes do i want?0