which poploc for reba sl's
mintsauce5
Posts: 193
Hi ,
a bit of help needed please , ive got a 2009 rockhopper pro with reba sl forks , i'm looking to fit a remote poploc on them , i've looked through the faq's and done a search but i can't find anything telling me exactly what i need to buy to upgrade my rebas to a poploc , can anyone point me in the right direction please ? all advice appreciated :?:
a bit of help needed please , ive got a 2009 rockhopper pro with reba sl forks , i'm looking to fit a remote poploc on them , i've looked through the faq's and done a search but i can't find anything telling me exactly what i need to buy to upgrade my rebas to a poploc , can anyone point me in the right direction please ? all advice appreciated :?:
0
Comments
-
Depends on if you can. You may have a manual friction stack atm (if you do you need to change this)- you'll need a non friction one that's moved by the pop loc0
-
any idea how i can tell what i have ?0
-
picture of the top and I can.
Do you currently use your hand to lock it out? If so you have a friction stack.0 -
Hi ,
yes i have to move the adjuster on the fork crown by hand0 -
there's your answer then. You need a pop loc kit and a sprung non-friction stack to connect to poploc to.0
-
i've found a poploc adjust kit , do the stacks have to be purchased seperatley ?
cant seem to find them on the chainreaction website :?:0 -
You can get the motion control sprung damper and poploc as part of a kit.
Try and get a poploc adjust too, or you wont be able to tune compression damping.
This will not be cheap.0 -
It'd be cheaper to sell or swap them and get some WITH Pop Loc to be honest, most Rebas seem to ship with Pop Loc nowadays. You could sell them for £150-200ish if they're in very good nick and buy another set for the same with PopLoc. It certainly won't lower their value.
Frustratingly I'm the other way around, I much prefer the dial versions. Although I recently stuck a remote adjustable seatpost jobby on there, might bite the bullet and stick it on there for proper full array of levers0 -
my next question , i've found the kit with the none friction stack but it says not suitable for 2009 reba's , how can i tell what year mine are , its a 2009 rockhopper does that mean they are 2009 rebas as well ?0
-
yes, not suitable."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0