Shimano Shifters
Pands
Posts: 40
Hello Guys,
Hoping someone can point me in the right direction, I want to remove the indicators from my shifters so they can tuck under my brakes a little better giving more room.
What can I use to fill the hole left, will a frame patch do the job or can you buy a cap that fits them?
Iv had a look around and cannot seem to see anything
Cheers
Hoping someone can point me in the right direction, I want to remove the indicators from my shifters so they can tuck under my brakes a little better giving more room.
What can I use to fill the hole left, will a frame patch do the job or can you buy a cap that fits them?
Iv had a look around and cannot seem to see anything
Cheers
Spesh Sworks Enduro Custom Build!!
0
Comments
-
and the shifters are?"Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
B*lls :oops:
Shimano, rear is XT and front LX from around 07ish.
CheersSpesh Sworks Enduro Custom Build!!0 -
Mmm the LX sl- M570one just had some bungs to fill the holes.
the other versions did not mention this. but some tape to cover would do.
the XT, lets take the SL-M770 should have covers included and again is just the two bolts.
the m750 is like the m570 lx one.
tech docs Here
and new XT cover.
"Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
http://bike.shimano.com/publish/content/global_cycle/en/us/index/tech_support/tech_tips.download.-Par50rparsys-0023-downloadFile.html/17%29%20Optical%20Gear%20Display%20Removal.pdf
i was going to ask the same question good thing i didnt
0
