Gear shifter - not enough clicks
ijportwine
Posts: 35
I am trying to fix the gears on a mates Trek 8000. The shifters, which are Deore LX, do not have enough clicks in them. Eg before the cable is attached, for the rear there are only 4 or 5 clicks , consequently only the 4 or 5 smaller cogs are accessible.
Do you think the shifter is broken, or is their some adjustment I am unaware of? I have given them a good spray of WD40, and am fitting new cables.
Do you think the shifter is broken, or is their some adjustment I am unaware of? I have given them a good spray of WD40, and am fitting new cables.
0
Comments
-
Either the ratchet is dead, or are clogged up.
Open them up and have a look.0 -
Have you tried putting a cable into them and loading the shifter (i.e. pulling the cable). They can feel rather funny when they aren't loaded.It's easier to ask for forgiveness than for permission.
I've bought a new bike....ouch - result
Can I buy a new bike?...No - no result0 -
Yes, I have put the cable in, but still the same issue0
-
Problem solved. Thanks for the suggestions.
In trepidation I opened the shifters up, they looked OK. Sprayed in some degreaser, then water, followed by GT85 - both back to life now.
Cheers0