Leaking Disk Brakes
Elliot Ross
Posts: 182
Hi ya, my pads were rubbing against the disk so i took the pads out. When i took them out a load of liquid came out and now that the pads are back in when i push on the lever nothing happens!
I can here the liquid going through the brakes but nothing happens please help!!!!! Wanted to go to thetford tomoz
I can here the liquid going through the brakes but nothing happens please help!!!!! Wanted to go to thetford tomoz
0
Comments
-
Where did the fluid come from? Until you identify where, fix it, an rebleed you ain't going anywhere.0
-
it came from the bottom of the brake. I can here the fluid going through but the pads dont move!0
-
i think it is where the fluid goes into the brake.0
-
Is the bleed nipple open? or maybe a seal has gone behind the pistons? You must identify it EXACTLY.0
-
shall i take a pic?0
-
You can, but it might not help!0
-
the pads are now very slightly moving which they werent doing about 5 mins ago0
-
It won't work until it is fixed and bled.0
-
take them to a bike shop for sorting."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
http://i709.photobucket.com/albums/ww92 ... M_0651.jpg
http://i709.photobucket.com/albums/ww92 ... M_0650.jpg
http://i709.photobucket.com/albums/ww92 ... M_0649.jpg
on this one you can see where the oil stuff has come from
http://i709.photobucket.com/albums/ww92 ... M_0652.jpg0 -
Can't really see from that - I would take it to a shop for a keen eye to look at.0
-
yeh will do pauls cycles said they will do it for 15 quid so that seems the best option0
-
Its worrying that this thread, followed this one:....
http://www.bikeradar.com/forums/viewtop ... t=12694227
You should have just taken it to a bike shop in the first place mate. As from what ive just seen in one of your pics it looks like youve taken the caliper apart to get the pads out?
Just leave it alone and take it to the pro's0 -
ok yeh bit of a noob tbh will take it to the pros ! do you think they just need bleeding as when i press on the lever there is no tension!?0
-
It has to be reassembled, fixed and bled.0
-
ok will have to take it to them and get em to fix it.0
-
£15 sounds like a bargain to me to get you back up and running.....0
-
yep at least ive learnt a few things from it so it isnt that bad0